KCal Library
#include <recurrence.h>
Inherits KCal::RecurrenceRule::RuleObserver.
Public Member Functions  
Recurrence ()  
Recurrence (const Recurrence &r)  
virtual  ~Recurrence () 
void  addExDate (const QDate &exdate) 
void  addExDateTime (const KDateTime &exdate) 
void  addExRule (RecurrenceRule *exrule) 
void  addMonthlyDate (short day) 
void  addMonthlyPos (short pos, const QBitArray &days) 
void  addMonthlyPos (short pos, ushort day) 
void  addObserver (RecurrenceObserver *observer) 
void  addRDate (const QDate &rdate) 
void  addRDateTime (const KDateTime &rdate) 
void  addRRule (RecurrenceRule *rrule) 
void  addWeeklyDays (const QBitArray &days) 
void  addYearlyDate (int date) 
void  addYearlyDay (int day) 
void  addYearlyMonth (short _rNum) 
void  addYearlyPos (short pos, const QBitArray &days) 
bool  allDay () const 
void  clear () 
QBitArray  days () const 
RecurrenceRule *  defaultRRule (bool create=false) const 
RecurrenceRule *  defaultRRuleConst () const 
void  deleteExRule (RecurrenceRule *exrule) 
void  deleteRRule (RecurrenceRule *rrule) 
void  dump () const 
int  duration () const 
int  durationTo (const KDateTime &dt) const 
int  durationTo (const QDate &date) const 
QDate  endDate () const 
KDateTime  endDateTime () const 
DateList  exDates () const 
DateTimeList  exDateTimes () const 
RecurrenceRule::List  exRules () const 
int  frequency () const 
KDateTime  getNextDateTime (const KDateTime &preDateTime) const 
KDateTime  getPreviousDateTime (const KDateTime &afterDateTime) const 
QList< int >  monthDays () const 
QList< RecurrenceRule::WDayPos >  monthPositions () const 
bool  operator!= (const Recurrence &r) const 
Recurrence &  operator= (const Recurrence &r) 
bool  operator== (const Recurrence &r) const 
DateList  rDates () const 
DateTimeList  rDateTimes () const 
bool  recurReadOnly () const 
void  recurrenceChanged (RecurrenceRule *) 
ushort  recurrenceType () const 
bool  recurs () const 
bool  recursAt (const KDateTime &dt) const 
bool  recursOn (const QDate &date, const KDateTime::Spec &timeSpec) const 
TimeList  recurTimesOn (const QDate &date, const KDateTime::Spec &timeSpec) const 
void  removeExRule (RecurrenceRule *exrule) 
void  removeObserver (RecurrenceObserver *observer) 
void  removeRRule (RecurrenceRule *rrule) 
RecurrenceRule::List  rRules () const 
void  setAllDay (bool allDay) 
void  setDaily (int freq) 
void  setDuration (int duration) 
void  setEndDate (const QDate &endDate) 
void  setEndDateTime (const KDateTime &endDateTime) 
void  setExDates (const DateList &exdates) 
void  setExDateTimes (const DateTimeList &exdates) 
void  setFrequency (int freq) 
void  setHourly (int freq) 
void  setMinutely (int freq) 
void  setMonthly (int freq) 
void  setRDates (const DateList &rdates) 
void  setRDateTimes (const DateTimeList &rdates) 
void  setRecurReadOnly (bool readOnly) 
void  setStartDateTime (const KDateTime &start) 
void  setWeekly (int freq, int weekStart=1) 
void  setWeekly (int freq, const QBitArray &days, int weekStart=1) 
void  setYearly (int freq) 
void  shiftTimes (const KDateTime::Spec &oldSpec, const KDateTime::Spec &newSpec) 
QDate  startDate () const 
KDateTime  startDateTime () const 
DateTimeList  timesInInterval (const KDateTime &start, const KDateTime &end) const 
void  unsetRecurs () 
void  updated () 
int  weekStart () const 
QList< int >  yearDates () const 
QList< int >  yearDays () const 
QList< int >  yearMonths () const 
QList< RecurrenceRule::WDayPos >  yearPositions () const 
Static Public Member Functions  
static ushort  recurrenceType (const RecurrenceRule *rrule) 
Static Public Attributes  
static const QDate  MAX_DATE 
Protected Member Functions  
RecurrenceRule *  setNewRecurrenceType (RecurrenceRule::PeriodType type, int freq) 
Detailed Description
This class represents a recurrence rule for a calendar incidence.
It manages all recurrence rules, recurrence date/times, exception rules and exception date times that can appear inside calendar items. Each recurrence rule and exception rule is represented as an object of type RecurrenceRule.
For the simple case where at most one recurrence rule is present, this class provides shortcut methods to set the type: setMinutely() setHourly() setDaily() setWeekly() setMonthly() setYearly() to set/get general information about the recurrence: setEndDate() setEndDateTime() duration() durationTo() setDuration() frequency() setFrequency() and to set/get specific information about the recurrence within the interval: days() monthDays() monthPositions() yearDays() yearDates() yearMonths() yearPositions() addMonthlyPos() addMonthlyDate() addYearlyDay() addYearlyDate() addYearlyPos() addYearlyMonth() These are all available so that you don't have to work on the RecurrenceRule objects themselves. In other words, in that simple situation the interface stays almost the same compared to the old Recurrence class, which allowed only one recurrence rule.
As soon as your recurrence consists of multiple recurrence rules or exception rules, you cannot use the methods mentioned above any more (since each rule will have a different type and different settings). If you still call any of them, the set*ly methods will remove all rules and add one rule with the specified type. The add* and the other set* methods will change only the first recurrence rule, but leave the others untouched.
Definition at line 91 of file recurrence.h.
Member Enumeration Documentation
anonymous enum 
enumeration for describing how an event recurs, if at all.
Definition at line 103 of file recurrence.h.
Constructor & Destructor Documentation
Recurrence::Recurrence  (  ) 
Constructs an empty recurrence.
Definition at line 121 of file recurrence.cpp.
Recurrence::Recurrence  (  const Recurrence &  r  ) 

virtual 
Destructor.
Definition at line 143 of file recurrence.cpp.
Member Function Documentation
void Recurrence::addExRule  (  RecurrenceRule *  exrule  ) 
Add an exception rule to the recurrence.
 Parameters

exrule the exception rule to add
Definition at line 1204 of file recurrence.cpp.
void Recurrence::addMonthlyDate  (  short  day  ) 
Adds a date (e.g.
the 15th of each month) to the monthly day recurrence list.
 Parameters

day the date in the month to recur.
Definition at line 807 of file recurrence.cpp.
void Recurrence::addMonthlyPos  (  short  pos, 
const QBitArray &  days  
) 
Adds a position (e.g.
first monday) to the monthly recurrence rule.
 Parameters

pos the position in the month for the recurrence, with valid values being 15 (5 weeks max in a month). days the days for the position to recur on (bit 0 = Monday). Example: pos = 2, and bits 0 and 2 are set in days: the rule is to repeat every 2nd Monday and Wednesday in the month.
Definition at line 757 of file recurrence.cpp.
void Recurrence::addObserver  (  RecurrenceObserver *  observer  ) 
Installs an observer.
Whenever some setting of this recurrence object is changed, the recurrenceUpdated( Recurrence* ) method of each observer will be called to inform it of changes.
 Parameters

observer the Recurrence::Observerderived object, which will be installed as an observer of this object.
Definition at line 162 of file recurrence.cpp.
void Recurrence::addRRule  (  RecurrenceRule *  rrule  ) 
Add a recurrence rule to the recurrence.
 Parameters

rrule the recurrence rule to add
Definition at line 1165 of file recurrence.cpp.
void Recurrence::addWeeklyDays  (  const QBitArray &  days  ) 
Adds days to the weekly day recurrence list.
 Parameters

days a 7 bit array indicating which days on which to recur (bit 0 = Monday).
Definition at line 745 of file recurrence.cpp.
void Recurrence::addYearlyDate  (  int  date  ) 
Adds date within a yearly recurrence.
The month(s) for the recurrence can be specified with addYearlyMonth(), otherwise the month of the start date is used.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
 Parameters

date the day of the month for the event
Definition at line 850 of file recurrence.cpp.
void Recurrence::addYearlyDay  (  int  day  ) 
Adds day number of year within a yearly recurrence.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
 Parameters

day the day of the year for the event. E.g. if day is 60, this means Feb 29 in leap years and March 1 in nonleap years.
Definition at line 834 of file recurrence.cpp.
void Recurrence::addYearlyMonth  (  short  _rNum  ) 
Adds month in yearly recurrence.
You can specify specific day numbers within the months (by calling addYearlyDate()) or specific day positions within the month (by calling addYearlyPos).
 Parameters

_rNum the month in which the event shall recur.
Definition at line 862 of file recurrence.cpp.
void Recurrence::addYearlyPos  (  short  pos, 
const QBitArray &  days  
) 
Adds position within month/year within a yearly recurrence.
If months are specified (via addYearlyMonth()), the parameters are understood as position within these months, otherwise within the year.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
 Parameters

pos the position in the month/year for the recurrence, with valid values being 1 to 53 and 1 to 53 (53 weeks max in a year). days the days for the position to recur on (bit 0 = Monday). Example: pos = 2, and bits 0 and 2 are set in days If months are specified (via addYearlyMonth), e.g. March, the rule is to repeat every year on the 2nd Monday and Wednesday of March. If no months are specified, the fule is to repeat every year on the 2nd Monday and Wednesday of the year.
Definition at line 856 of file recurrence.cpp.
bool Recurrence::allDay  (  )  const 
Set whether the recurrence has no time, just a date.
Allday means – according to rfc2445 – that the event has no time associated. N.B. This property is derived by default from whether setStartDateTime() is called with a dateonly or date/time parameter.
 Returns
 whether the recurrence has a time (false) or it is just a date (true).
Definition at line 181 of file recurrence.cpp.
void Recurrence::clear  (  ) 
Removes all recurrence and exception rules and dates.
Definition at line 552 of file recurrence.cpp.
QBitArray Recurrence::days  (  )  const 
Returns week day mask (bit 0 = Monday).
Definition at line 630 of file recurrence.cpp.
void Recurrence::deleteExRule  (  RecurrenceRule *  exrule  ) 
Remove an exception rule from the recurrence and delete it.
 Parameters

exrule the exception rule to remove
Definition at line 1227 of file recurrence.cpp.
void Recurrence::deleteRRule  (  RecurrenceRule *  rrule  ) 
Remove a recurrence rule from the recurrence and delete it.
 Parameters

rrule the recurrence rule to remove
Definition at line 1188 of file recurrence.cpp.
void Recurrence::dump  (  )  const 
Debug output.
Definition at line 1348 of file recurrence.cpp.
int Recurrence::duration  (  )  const 
Returns 1 if the event recurs infinitely, 0 if the end date is set, otherwise the total number of recurrences, including the initial occurrence.
Definition at line 485 of file recurrence.cpp.
int Recurrence::durationTo  (  const KDateTime &  dt  )  const 
Returns the number of recurrences up to and including the date/time specified.
 Warning
 This function can be very time consuming  use it sparingly!
Definition at line 491 of file recurrence.cpp.
int Recurrence::durationTo  (  const QDate &  date  )  const 
Returns the number of recurrences up to and including the date specified.
 Warning
 This function can be very time consuming  use it sparingly!
Definition at line 498 of file recurrence.cpp.
QDate Recurrence::endDate  (  )  const 
Returns the date of the last recurrence.
Calculates the cumulative end of the whole recurrence (rdates and rrules).
An invalid date is returned if the recurrence has no end.
If any rrule is infinite, or the recurrence doesn't have any rrules or rdates, an invalid date is returned.
Definition at line 457 of file recurrence.cpp.
KDateTime Recurrence::endDateTime  (  )  const 
Returns the date/time of the last recurrence.
Calculates the cumulative end of the whole recurrence (rdates and rrules).
An invalid date is returned if the recurrence has no end.
If any rrule is infinite, or the recurrence doesn't have any rrules or rdates, an invalid date is returned.
Definition at line 432 of file recurrence.cpp.
int Recurrence::frequency  (  )  const 
Returns frequency of recurrence, in terms of the recurrence time period type.
Definition at line 600 of file recurrence.cpp.
KDateTime Recurrence::getNextDateTime  (  const KDateTime &  preDateTime  )  const 
Returns the date and time of the next recurrence, after the specified date/time.
If the recurrence has no time, the next date after the specified date is returned.
 Parameters

preDateTime the date/time after which to find the recurrence.
 Returns
 date/time of next recurrence (strictly later than the given KDateTime), or invalid date if none.
Definition at line 1012 of file recurrence.cpp.
KDateTime Recurrence::getPreviousDateTime  (  const KDateTime &  afterDateTime  )  const 
Returns the date and time of the last previous recurrence, before the specified date/time.
If a time later than 00:00:00 is specified and the recurrence has no time, 00:00:00 on the specified date is returned if that date recurs.
 Parameters

afterDateTime the date/time before which to find the recurrence.
 Returns
 date/time of previous recurrence (strictly earlier than the given KDateTime), or invalid date if none.
Definition at line 1087 of file recurrence.cpp.
QList< int > Recurrence::monthDays  (  )  const 
Returns list of day numbers of a month.
Definition at line 649 of file recurrence.cpp.
QList< RecurrenceRule::WDayPos > Recurrence::monthPositions  (  )  const 
Returns list of day positions in months.
Definition at line 660 of file recurrence.cpp.

inline 
Comparison operator for inequality.
 Parameters

r instance to compare with
 Returns
 true if recurrences are the different, false if the same
Definition at line 146 of file recurrence.h.
Recurrence & Recurrence::operator=  (  const Recurrence &  r  ) 
Assignment operator.
 Parameters

r the recurrence which will be assigned to this. &
 Since
 4.5
Definition at line 153 of file recurrence.cpp.
bool Recurrence::operator==  (  const Recurrence &  r  )  const 
Comparison operator for equality.
 Parameters

r instance to compare with
 Returns
 true if recurrences are the same, false otherwise
Definition at line 148 of file recurrence.cpp.
bool Recurrence::recurReadOnly  (  )  const 
Returns true if the recurrence is readonly, or false if it can be changed.
Definition at line 572 of file recurrence.cpp.
ushort Recurrence::recurrenceType  (  )  const 
Returns the event's recurrence status.
See the enumeration at the top of this file for possible values.
Definition at line 238 of file recurrence.cpp.

static 
Returns the recurrence status for a recurrence rule.
See the enumeration at the top of this file for possible values.
 Parameters

rrule the recurrence rule to get the type for
Definition at line 246 of file recurrence.cpp.
bool Recurrence::recurs  (  )  const 
Returns whether the event recurs at all.
Definition at line 233 of file recurrence.cpp.
bool Recurrence::recursAt  (  const KDateTime &  dt  )  const 
Returns true if the date/time specified is one at which the event will recur.
Times are rounded down to the nearest minute to determine the result.
 Parameters

dt is the date/time to check.
Definition at line 399 of file recurrence.cpp.
bool Recurrence::recursOn  (  const QDate &  date, 
const KDateTime::Spec &  timeSpec  
)  const 
Returns true if the date specified is one on which the event will recur.
 Parameters

date date to check. timeSpec time specification for date
.
Definition at line 334 of file recurrence.cpp.
TimeList Recurrence::recurTimesOn  (  const QDate &  date, 
const KDateTime::Spec &  timeSpec  
)  const 
Returns a list of the times on the specified date at which the recurrence will occur.
The returned times should be interpreted in the context of timeSpec
.
 Parameters

date the date for which to find the recurrence times timeSpec time specification for date
Definition at line 881 of file recurrence.cpp.
void Recurrence::removeExRule  (  RecurrenceRule *  exrule  ) 
Remove an exception rule from the recurrence.
exrule
is not deleted; it is the responsibility of the caller to ensure that it is deleted.
 Parameters

exrule the exception rule to remove
Definition at line 1216 of file recurrence.cpp.
void Recurrence::removeObserver  (  RecurrenceObserver *  observer  ) 
Removes an observer that was added with addObserver.
If the given object was not an observer, it does nothing.
 Parameters

observer the Recurrence::Observerderived object to be removed from the list of observers of this object.
Definition at line 169 of file recurrence.cpp.
void Recurrence::removeRRule  (  RecurrenceRule *  rrule  ) 
Remove a recurrence rule from the recurrence.
rrule
is not deleted; it is the responsibility of the caller to ensure that it is deleted.
 Parameters

rrule the recurrence rule to remove
Definition at line 1177 of file recurrence.cpp.
void Recurrence::setAllDay  (  bool  allDay  ) 
Sets whether the dtstart is a allday (i.e.
has no time attached)
 Parameters

allDay If the recurrence is for allday item (true) or has a time associated (false).
Definition at line 186 of file recurrence.cpp.
void Recurrence::setDaily  (  int  freq  ) 
Sets an event to recur daily.
By default infinite recurrence is used. The minute and second of the recurrence is taken from the start date (if you need to change them, you will have to modify the defaultRRule's byMinute list manually. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a daily recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. 2 is every other day
Definition at line 722 of file recurrence.cpp.
void Recurrence::setDuration  (  int  duration  ) 
Sets the total number of times the event is to occur, including both the first and last.
Definition at line 503 of file recurrence.cpp.
void Recurrence::setEndDate  (  const QDate &  endDate  ) 
Sets the date of the last recurrence.
The end time is set to the recurrence start time.
 Parameters

endDate the ending date after which to stop recurring. If the recurrence is not allday, the end time will be 23:59.
Definition at line 463 of file recurrence.cpp.
void Recurrence::setEndDateTime  (  const KDateTime &  endDateTime  ) 
Sets the date and time of the last recurrence.
 Parameters

endDateTime the ending date/time after which to stop recurring.
Definition at line 472 of file recurrence.cpp.
void Recurrence::setFrequency  (  int  freq  ) 
Sets the frequency of recurrence, in terms of the recurrence time period type.
Definition at line 608 of file recurrence.cpp.
void Recurrence::setHourly  (  int  freq  ) 
Sets an event to recur hourly.
By default infinite recurrence is used. The minute of the recurrence is taken from the start date (if you need to change it, you will have to modify the defaultRRule's byMinute list manually. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a hourly recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. 2 is every other hour
Definition at line 715 of file recurrence.cpp.
void Recurrence::setMinutely  (  int  freq  ) 
Sets an event to recur minutely.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a minutely recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. 2 is every other minute
Definition at line 708 of file recurrence.cpp.
void Recurrence::setMonthly  (  int  freq  ) 
Sets an event to recur monthly.
By default infinite recurrence is used. The date of the monthly recurrence will be taken from the start date unless you explicitly add one or more recurrence dates with addMonthlyDate or a recurrence position in the month (e.g. first monday) using addMonthlyPos. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a monthly recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. 3 for every third month.
Definition at line 750 of file recurrence.cpp.
void Recurrence::setRecurReadOnly  (  bool  readOnly  ) 
Set if recurrence is readonly or can be changed.
Definition at line 567 of file recurrence.cpp.
void Recurrence::setStartDateTime  (  const KDateTime &  start  ) 
Set start of recurrence.
If start
is dateonly, the recurrence is set to allday. Otherwise, the start is set to a date and time, and the recurrence is set to nonallday.
 Parameters

start the new start date or date/time of the recurrence.
Definition at line 582 of file recurrence.cpp.
void Recurrence::setWeekly  (  int  freq, 
int  weekStart = 1 

) 
Sets an event to recur weekly.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a weekly recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. every other week etc. weekStart the first day of the week (Monday=1 .. Sunday=7, default is Monday).
Definition at line 729 of file recurrence.cpp.
void Recurrence::setWeekly  (  int  freq, 
const QBitArray &  days,  
int  weekStart = 1 

) 
Sets an event to recur weekly.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a weekly recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. every other week etc. days a 7 bit array indicating which days on which to recur (bit 0 = Monday). weekStart the first day of the week (Monday=1 .. Sunday=7, default is Monday).
Definition at line 739 of file recurrence.cpp.
void Recurrence::setYearly  (  int  freq  ) 
Sets an event to recur yearly.
By default, this will recur every year on the same date (e.g. every year on April 15 if the start date was April 15). The day of the year can be specified with addYearlyDay(). The day of the month can be specified with addYearlyByDate If both a month and a day ar specified with addYearlyMonth and addYearlyDay, the day is understood as day number within the month.
A position (e.g. 3rd Sunday of year/month, or last Friday of year/month) can be specified with addYearlyPos. Again, if a month is specified, this position is understood as within that month, otherwise within the year.
By default infinite recurrence is used. To set an end date use the method setEndDate and to set the number of occurrences use setDuration.
This method clears all recurrence rules and adds one rule with a yearly recurrence. All other recurrence components (recurrence date/times, exception date/times and exception rules) are not modified.
 Parameters

freq the frequency to recur, e.g. 3 for every third year.
Definition at line 826 of file recurrence.cpp.
void Recurrence::shiftTimes  (  const KDateTime::Spec &  oldSpec, 
const KDateTime::Spec &  newSpec  
) 
Shift the times of the recurrence so that they appear at the same clock time as before but in a new time zone.
The shift is done from a viewing time zone rather than from the actual recurrence time zone.
For example, shifting a recurrence whose start time is 09:00 America/New York, using an old viewing time zone (oldSpec
) of Europe/London, to a new time zone (newSpec
) of Europe/Paris, will result in the time being shifted from 14:00 (which is the London time of the recurrence start) to 14:00 Paris time.
 Parameters

oldSpec the time specification which provides the clock times newSpec the new time specification
Definition at line 517 of file recurrence.cpp.
QDate Recurrence::startDate  (  )  const 
Return the start date/time of the recurrence.
Definition at line 577 of file recurrence.cpp.
KDateTime Recurrence::startDateTime  (  )  const 
Return the start date/time of the recurrence (Time for allday recurrences will be 0:00).
 Returns
 the current start/time of the recurrence.
Definition at line 176 of file recurrence.cpp.
DateTimeList Recurrence::timesInInterval  (  const KDateTime &  start, 
const KDateTime &  end  
)  const 
Returns a list of all the times at which the recurrence will occur between two specified times.
There is a (large) maximum limit to the number of times returned. If due to this limit the list is incomplete, this is indicated by the last entry being set to an invalid KDateTime value. If you need further values, call the method again with a start time set to just after the last valid time returned.
 Parameters

start inclusive start of interval end inclusive end of interval
 Returns
 list of date/time values
Definition at line 946 of file recurrence.cpp.
void Recurrence::unsetRecurs  (  ) 
Removes all recurrence rules.
Recurrence dates and exceptions are not removed.
Definition at line 543 of file recurrence.cpp.
int Recurrence::weekStart  (  )  const 
Returns the first day of the week.
Uses only the first RRULE if present (i.e. a second RRULE as well as all EXRULES are ignored!
 Returns
 Weekday of the first day of the week (Monday=1 .. Sunday=7)
Definition at line 623 of file recurrence.cpp.
QList< int > Recurrence::yearDates  (  )  const 
Returns the dates within a yearly recurrence.
 Returns
 the days of the month for the event. E.g. if the list contains 13, this means the recurrence happens on the 13th of the month. The months for the recurrence can be obtained through yearlyMonths(). If this list is empty, the month of the start date is used.
Definition at line 674 of file recurrence.cpp.
QList< int > Recurrence::yearDays  (  )  const 
Returns the day numbers within a yearly recurrence.
 Returns
 the days of the year for the event. E.g. if the list contains 60, this means the recurrence happens on day 60 of the year, i.e. on Feb 29 in leap years and March 1 in nonleap years.
Definition at line 668 of file recurrence.cpp.
QList< int > Recurrence::yearMonths  (  )  const 
Returns the months within a yearly recurrence.
 Returns
 the months for the event. E.g. if the list contains 11, this means the recurrence happens in November. The days for the recurrence can be obtained either through yearDates() if they are given as dates within the month or through yearlyPositions() if they are given as positions within the month. If none is specified, the date of the start date is used.
Definition at line 679 of file recurrence.cpp.
QList< RecurrenceRule::WDayPos > Recurrence::yearPositions  (  )  const 
Returns the positions within a yearly recurrence.
 Returns
 the positions for the event, either within a month (if months are set through addYearlyMonth()) or within the year. E.g. if the list contains {Pos=3, Day=5}, this means the third friday. If a month is set this position is understoodas third Friday in the given months, otherwise as third Friday of the year.Returns list of day positions in months, for a recursYearlyPos recurrence rule.
Definition at line 685 of file recurrence.cpp.
Member Data Documentation

static 
Upper date limit for recurrences.
Definition at line 555 of file recurrence.h.
The documentation for this class was generated from the following files:
Documentation copyright © 19962014 The KDE developers.
Generated on Tue Oct 14 2014 23:00:58 by doxygen 1.8.7 written by Dimitri van Heesch, © 19972006
KDE's Doxygen guidelines are available online.