kstars
#include <qcustomplot.h>
Friends  
const QCPDataSelection  operator+ (const QCPDataSelection &a, const QCPDataSelection &b) 
const QCPDataSelection  operator+ (const QCPDataRange &a, const QCPDataSelection &b) 
const QCPDataSelection  operator+ (const QCPDataSelection &a, const QCPDataRange &b) 
const QCPDataSelection  operator+ (const QCPDataRange &a, const QCPDataRange &b) 
const QCPDataSelection  operator (const QCPDataSelection &a, const QCPDataSelection &b) 
const QCPDataSelection  operator (const QCPDataRange &a, const QCPDataSelection &b) 
const QCPDataSelection  operator (const QCPDataSelection &a, const QCPDataRange &b) 
const QCPDataSelection  operator (const QCPDataRange &a, const QCPDataRange &b) 
Related Functions  
(Note that these are not member functions.)  
QDebug  operator<< (QDebug d, const QCPDataSelection &selection) 
Detailed Description
Describes a data set by holding multiple QCPDataRange instances.
QCPDataSelection manages multiple instances of QCPDataRange in order to represent any (possibly disjoint) set of data selection.
The data selection can be modified with addition and subtraction operators which take QCPDataSelection and QCPDataRange instances, as well as methods such as addDataRange and clear. Read access is provided by dataRange, dataRanges, dataRangeCount, etc.
The method simplify is used to join directly adjacent or even overlapping QCPDataRange instances. QCPDataSelection automatically simplifies when using the addition/subtraction operators. The only case when simplify is left to the user, is when calling addDataRange, with the parameter simplify explicitly set to false. This is useful if many data ranges will be added to the selection successively and the overhead for simplifying after each iteration shall be avoided. In this case, you should make sure to call simplify after completing the operation.
Use enforceType to bring the data selection into a state complying with the constraints for selections defined in QCP::SelectionType.
QCustomPlot's data selection mechanism is based on QCPDataSelection and QCPDataRange.
Iterating over a data selection
As an example, the following code snippet calculates the average value of a graph's data selection:
Definition at line 1184 of file qcustomplot.h.
Constructor & Destructor Documentation

explicit 
Creates an empty QCPDataSelection.
Definition at line 2350 of file qcustomplot.cpp.

explicit 
Creates a QCPDataSelection containing the provided range.
Definition at line 2357 of file qcustomplot.cpp.
Member Function Documentation
void QCPDataSelection::addDataRange  (  const QCPDataRange &  dataRange, 
bool  simplify = true 

) 
Adds the given dataRange to this data selection. This is equivalent to the += operator but allows disabling immediate simplification by setting simplify to false. This can improve performance if adding a very large amount of data ranges successively. In this case, make sure to call simplify manually, after the operation.
Definition at line 2513 of file qcustomplot.cpp.
void QCPDataSelection::clear  (  ) 
Removes all data ranges. The data selection then contains no data points.
Definition at line 2525 of file qcustomplot.cpp.
bool QCPDataSelection::contains  (  const QCPDataSelection &  other  )  const 
Returns true if the data selection other is contained entirely in this data selection, i.e. all data point indices that are in other are also in this data selection.
 See also
 QCPDataRange::contains
Definition at line 2625 of file qcustomplot.cpp.
int QCPDataSelection::dataPointCount  (  )  const 
Returns the total number of data points contained in all data ranges that make up this data selection.
Definition at line 2466 of file qcustomplot.cpp.
QCPDataRange QCPDataSelection::dataRange  (  int  index = 0  )  const 
Returns the data range with the specified index.
If the data selection is simplified (the usual state of the selection, see simplify), the ranges are sorted by ascending data point index.
 See also
 dataRangeCount
Definition at line 2482 of file qcustomplot.cpp.

inline 
Returns the number of ranges that make up the data selection. The ranges can be accessed by dataRange via their index.
 See also
 dataRange, dataPointCount
Definition at line 1209 of file qcustomplot.h.

inline 
Returns all data ranges that make up the data selection. If the data selection is simplified (the usual state of the selection, see simplify), the ranges are sorted by ascending data point index.
 See also
 dataRange
Definition at line 1215 of file qcustomplot.h.
void QCPDataSelection::enforceType  (  QCP::SelectionType  type  ) 
Makes sure this data selection conforms to the specified type selection type. Before the type is enforced, simplify is called.
Depending on type, enforcing means adding new data points that were previously not part of the selection, or removing data points from the selection. If the current selection already conforms to type, the data selection is not changed.
 See also
 QCP::SelectionType
Definition at line 2579 of file qcustomplot.cpp.
QCPDataSelection QCPDataSelection::intersection  (  const QCPDataRange &  other  )  const 
Returns a data selection containing the points which are both in this data selection and in the data range other.
A common use case is to limit an unknown data selection to the valid range of a data container, using QCPDataContainer::dataRange as other. One can then safely iterate over the returned data selection without exceeding the data container's bounds.
Definition at line 2652 of file qcustomplot.cpp.
QCPDataSelection QCPDataSelection::intersection  (  const QCPDataSelection &  other  )  const 
Returns a data selection containing the points which are both in this data selection and in the data selection other.
Definition at line 2665 of file qcustomplot.cpp.
QCPDataSelection QCPDataSelection::inverse  (  const QCPDataRange &  outerRange  )  const 
Returns a data selection which is the exact inverse of this data selection, with outerRange defining the base range on which to invert. If outerRange is smaller than the span of this data selection, it is expanded accordingly.
For example, this method can be used to retrieve all unselected segments by setting outerRange to the full data range of the plottable, and calling this method on a data selection holding the selected segments.
Definition at line 2683 of file qcustomplot.cpp.

inline 
Returns true if there are no data ranges, and thus no data points, in this QCPDataSelection instance.
 See also
 dataRangeCount
Definition at line 1224 of file qcustomplot.h.

inline 
Definition at line 1191 of file qcustomplot.h.
QCPDataSelection & QCPDataSelection::operator+=  (  const QCPDataSelection &  other  ) 
Adds the data selection of other to this data selection, and then simplifies this data selection (see simplify).
Definition at line 2385 of file qcustomplot.cpp.
QCPDataSelection & QCPDataSelection::operator+=  (  const QCPDataRange &  other  ) 
Adds the data range other to this data selection, and then simplifies this data selection (see simplify).
Definition at line 2396 of file qcustomplot.cpp.
QCPDataSelection & QCPDataSelection::operator=  (  const QCPDataSelection &  other  ) 
Removes all data point indices that are described by other from this data range.
Definition at line 2405 of file qcustomplot.cpp.
QCPDataSelection & QCPDataSelection::operator=  (  const QCPDataRange &  other  ) 
Removes all data point indices that are described by other from this data range.
Definition at line 2416 of file qcustomplot.cpp.
bool QCPDataSelection::operator==  (  const QCPDataSelection &  other  )  const 
Returns true if this selection is identical (contains the same data ranges with the same begin and end indices) to other.
Note that both data selections must be in simplified state (the usual state of the selection, see simplify) for this operator to return correct results.
Definition at line 2369 of file qcustomplot.cpp.
void QCPDataSelection::simplify  (  ) 
Sorts all data ranges by range begin index in ascending order, and then joins directly adjacent or overlapping ranges. This can reduce the number of individual data ranges in the selection, and prevents possible doublecounting when iterating over the data points held by the data ranges.
This method is automatically called when using the addition/subtraction operators. The only case when simplify is left to the user, is when calling addDataRange, with the parameter simplify explicitly set to false.
Definition at line 2539 of file qcustomplot.cpp.
QCPDataRange QCPDataSelection::span  (  )  const 
Returns a QCPDataRange which spans the entire data selection, including possible intermediate segments which are not part of the original data selection.
Definition at line 2499 of file qcustomplot.cpp.
Friends And Related Function Documentation

friend 
Return a QCPDataSelection with the data points in a joined with the data points in b. The resulting data selection is already simplified (see QCPDataSelection::simplify).
Definition at line 1250 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points in a joined with the data points in b. The resulting data selection is already simplified (see QCPDataSelection::simplify).
Definition at line 1261 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points in a joined with the data points in b. The resulting data selection is already simplified (see QCPDataSelection::simplify).
Definition at line 1272 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points in a joined with the data points in b. The resulting data selection is already simplified (see QCPDataSelection::simplify).
Definition at line 1283 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points which are in a but not in b.
Definition at line 1293 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points which are in a but not in b.
Definition at line 1303 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points which are in a but not in b.
Definition at line 1313 of file qcustomplot.h.

friend 
Return a QCPDataSelection with the data points which are in a but not in b.
Definition at line 1323 of file qcustomplot.h.

related 
Prints selection in a human readable format to the qDebug output.
Definition at line 1344 of file qcustomplot.h.
The documentation for this class was generated from the following files:
Documentation copyright © 19962019 The KDE developers.
Generated on Sun Dec 15 2019 03:10:24 by doxygen 1.8.7 written by Dimitri van Heesch, © 19972006
KDE's Doxygen guidelines are available online.