#include <kstartupinfo.h>

Inheritance diagram for KStartupInfo:

Public Types
enum	{ CleanOnCantDetect = 1 << 0, DisableKWinModule = 1 << 1, AnnounceSilenceChanges = 1 << 2 }

enum	startup_t { NoMatch, Match, CantDetect }

Signals
void	gotNewStartup (const KStartupInfoId &id, const KStartupInfoData &data)

void	gotRemoveStartup (const KStartupInfoId &id, const KStartupInfoData &data)

void	gotStartupChange (const KStartupInfoId &id, const KStartupInfoData &data)

Public Member Functions
	KStartupInfo (int flags, QObject *parent=0)

	KStartupInfo (bool clean_on_cantdetect, QObject *parent=0)

virtual	~KStartupInfo ()

startup_t	checkStartup (WId w)

startup_t	checkStartup (WId w, KStartupInfoId &id)

startup_t	checkStartup (WId w, KStartupInfoData &data)

startup_t	checkStartup (WId w, KStartupInfoId &id, KStartupInfoData &data)

void	setTimeout (unsigned int secs)

Public Member Functions inherited from QObject
	QObject (QObject *parent)

	QObject (QObject parent, const char name)

virtual	~QObject ()

bool	blockSignals (bool block)

QObject *	child (const char objName, const char inheritsClass, bool recursiveSearch) const

const QObjectList &	children () const

const char *	className () const

bool	connect (const QObject sender, const char signal, const char *method, Qt::ConnectionType type) const

void	deleteLater ()

void	destroyed (QObject *obj)

bool	disconnect (const QObject receiver, const char method)

bool	disconnect (const char signal, const QObject receiver, const char *method)

void	dumpObjectInfo ()

void	dumpObjectTree ()

QList< QByteArray >	dynamicPropertyNames () const

virtual bool	event (QEvent *e)

virtual bool	eventFilter (QObject watched, QEvent event)

T	findChild (const QString &name) const

QList< T >	findChildren (const QRegExp &regExp) const

QList< T >	findChildren (const QString &name) const

bool	inherits (const char *className) const

void	insertChild (QObject *object)

void	installEventFilter (QObject *filterObj)

bool	isA (const char *className) const

bool	isWidgetType () const

void	killTimer (int id)

virtual const QMetaObject *	metaObject () const

void	moveToThread (QThread *targetThread)

const char *	name () const

const char *	name (const char *defaultName) const

QString	objectName () const

QObject *	parent () const

QVariant	property (const char *name) const

void	removeChild (QObject *object)

void	removeEventFilter (QObject *obj)

void	setName (const char *name)

void	setObjectName (const QString &name)

void	setParent (QObject *parent)

bool	setProperty (const char *name, const QVariant &value)

bool	signalsBlocked () const

int	startTimer (int interval)

QThread *	thread () const

Static Public Member Functions
static void	appStarted ()

static void	appStarted (const QByteArray &startup_id)

static QByteArray	createNewStartupId ()

static KStartupInfoId	currentStartupIdEnv ()

static void	disableAutoAppStartedSending (bool disable=true)

static void	handleAutoAppStartedSending ()

static void	resetStartupEnv ()

static bool	sendChange (const KStartupInfoId &id, const KStartupInfoData &data)

static bool	sendChangeX (Display *dpy, const KStartupInfoId &id, const KStartupInfoData &data)

static bool	sendFinish (const KStartupInfoId &id)

static bool	sendFinish (const KStartupInfoId &id, const KStartupInfoData &data)

static bool	sendFinishX (Display *dpy, const KStartupInfoId &id)

static bool	sendFinishX (Display *dpy, const KStartupInfoId &id, const KStartupInfoData &data)

static bool	sendStartup (const KStartupInfoId &id, const KStartupInfoData &data)

static bool	sendStartupX (Display *dpy, const KStartupInfoId &id, const KStartupInfoData &data)

static void	setNewStartupId (QWidget *window, const QByteArray &startup_id)

static void	setWindowStartupId (WId window, const QByteArray &id)

static void	silenceStartup (bool silence)

static QByteArray	windowStartupId (WId w)

Static Public Member Functions inherited from QObject
bool	connect (const QObject sender, const char signal, const QObject receiver, const char method, Qt::ConnectionType type)

bool	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type)

bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char method)

bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method)

QString	tr (const char sourceText, const char disambiguation, int n)

QString	trUtf8 (const char sourceText, const char disambiguation, int n)

Protected Member Functions
virtual void	customEvent (QEvent *e_P)

Protected Member Functions inherited from QObject
bool	checkConnectArgs (const char signal, const QObject object, const char *method)

virtual void	childEvent (QChildEvent *event)

virtual void	connectNotify (const char *signal)

virtual void	disconnectNotify (const char *signal)

int	receivers (const char *signal) const

QObject *	sender () const

int	senderSignalIndex () const

virtual void	timerEvent (QTimerEvent *event)

Additional Inherited Members
Static Protected Member Functions inherited from QObject
QByteArray	normalizeSignalSlot (const char *signalSlot)

Properties inherited from QObject
	objectName

Detailed Description

Class for manipulating the application startup notification.

This class can be used to send information about started application, change the information and receive this information. For detailed description, see kdelibs/kdecore/README.kstartupinfo.

You usually don't need to use this class for sending the notification information, as KDE libraries should do this when an application is started (e.g. KRun class).

For receiving the startup notification info, create an instance and connect to its slots. It will automatically detect started applications and when they are ready.

See also: KStartupInfoId; KStartupInfoData

Author: Lubos Lunak l.lun.nosp@m.ak@k.nosp@m.de.or.nosp@m.g

Definition at line 64 of file kstartupinfo.h.

Member Enumeration Documentation

anonymous enum

Enumerator
CleanOnCantDetect
DisableKWinModule
AnnounceSilenceChanges

Definition at line 121 of file kstartupinfo.h.

enum KStartupInfo::startup_t

NoMatch - the window doesn't match any existing startup notification
Match - the window matches an existing startup notification
CantDetect - unable to detect if the window matches any existing startup notification

Enumerator
NoMatch
Match
CantDetect

Definition at line 255 of file kstartupinfo.h.

Constructor & Destructor Documentation

KStartupInfo::KStartupInfo	(	int	flags,
		QObject *	parent = `0`
	)

explicit

Creates an instance that will receive the startup notifications.

The various flags passed may be

CleanOnCantDetect - when a new unknown window appears, all startup notifications for applications that are not compliant with the startup protocol are removed
DisableKWinModule - KWinModule, which is normally used to detect new windows, is disabled. With this flag, checkStartup() must be called in order to check newly mapped windows.
AnnounceSilenceChanges - normally, startup notifications are "removed" when they're silenced, and "recreated" when they're resumed. With this flag, the change is normally announced with gotStartupChange().

Parameters

flags	OR-ed combination of flags
parent	the parent of this QObject (can be 0 for no parent)

Definition at line 203 of file kstartupinfo.cpp.

KStartupInfo::KStartupInfo	(	bool	clean_on_cantdetect,
		QObject *	parent = `0`
	)

explicit

Creates an instance that will receive the startup notifications.

Parameters

clean_on_cantdetect	if true, and a new unknown window appears, removes all notification for applications that are not compliant with the app startup protocol
parent	the parent of this QObject (can be 0 for no parent)

Deprecated:

Definition at line 210 of file kstartupinfo.cpp.

KStartupInfo::~KStartupInfo ( )

virtual

Definition at line 218 of file kstartupinfo.cpp.

Member Function Documentation

void KStartupInfo::appStarted ( )

static

Manual notification that the application has started.

If you do not map a (toplevel) window, then startup notification will not disappear for the application until a timeout. You can use this as an alternative method in this case.

Definition at line 586 of file kstartupinfo.cpp.

void KStartupInfo::appStarted ( const QByteArray & startup_id )

static

Sends explicit notification that the startup notification with id startup_id should end.

Definition at line 600 of file kstartupinfo.cpp.

KStartupInfo::startup_t KStartupInfo::checkStartup ( WId w )

Checks if the given windows matches any existing startup notification.

Parameters

w	the window id to check

Returns: the result of the operation

Definition at line 689 of file kstartupinfo.cpp.

KStartupInfo::startup_t KStartupInfo::checkStartup	(	WId	w,
		KStartupInfoId &	id
	)

Checks if the given windows matches any existing startup notification, and if yes, returns the identification in id.

Parameters

w	the window id to check
id	if found, the id of the startup notification will be written here

Returns: the result of the operation

Definition at line 679 of file kstartupinfo.cpp.

KStartupInfo::startup_t KStartupInfo::checkStartup	(	WId	w,
		KStartupInfoData &	data
	)

Checks if the given windows matches any existing startup notification, and if yes, returns the notification data in data.

Parameters

w	the window id to check
data	if found, the data of the startup notification will be written here

Returns: the result of the operation

Definition at line 684 of file kstartupinfo.cpp.

KStartupInfo::startup_t KStartupInfo::checkStartup	(	WId	w,
		KStartupInfoId &	id,
		KStartupInfoData &	data
	)

Checks if the given windows matches any existing startup notification, and if yes, returns the identification in id and notification data in data.

Parameters

w	the window id to check
id	if found, the id of the startup notification will be written here
data	if found, the data of the startup notification will be written here

Returns: the result of the operation

Definition at line 673 of file kstartupinfo.cpp.

QByteArray KStartupInfo::createNewStartupId ( )

static

Creates and returns new startup id.

The id includes properly setup user timestamp.

Definition at line 1012 of file kstartupinfo.cpp.

KStartupInfoId KStartupInfo::currentStartupIdEnv ( )

static

Returns the current startup notification identification for the current startup notification environment variable.

Note that KApplication constructor unsets the variable and you have to use KApplication::startupId .

Returns: the current startup notification identification

Definition at line 1090 of file kstartupinfo.cpp.

void KStartupInfo::customEvent ( QEvent * e_P )

protectedvirtual

Reimplemented from QObject.

Definition at line 266 of file kstartupinfo.cpp.

void KStartupInfo::disableAutoAppStartedSending ( bool disable = true )

static

By default, the startup notification is ended for the application after it shows its first toplevel window.

If you app e.g. has several toplevel windows after its startup, you can disable the automatic handling, and call appStarted() manually after all toplevel windows have been shown.

Definition at line 621 of file kstartupinfo.cpp.

void KStartupInfo::gotNewStartup	(	const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

signal

Emitted when a new startup notification is created (i.e.

a new application is being started).

Parameters

id	the notification identification
data	the notification data

void KStartupInfo::gotRemoveStartup	(	const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

signal

Emitted when a startup notification is removed (either because it was detected that the application is ready or because of a timeout).

Parameters

id	the notification identification
data	the notification data

void KStartupInfo::gotStartupChange	(	const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

signal

Emitted when a startup notification changes.

Parameters

id	the notification identification
data	the notification data

void KStartupInfo::handleAutoAppStartedSending ( )

static

Definition at line 637 of file kstartupinfo.cpp.

void KStartupInfo::resetStartupEnv ( )

static

Unsets the startup notification environment variable.

Definition at line 1101 of file kstartupinfo.cpp.

bool KStartupInfo::sendChange	(	const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

static

Sends given notification data about started application with the given startup identification.

This is used for updating the notification info, if no notification for this identification exists, it's ignored.

Parameters

id	the id of the application
data	the application's data

Returns: true if successful, false otherwise

See also: KStartupInfoId; KStartupInfoData

Definition at line 496 of file kstartupinfo.cpp.

bool KStartupInfo::sendChangeX	(	Display *	dpy,
		const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

static

Like sendChange , uses dpy instead of qt_x11display() for sending the info.

Parameters

dpy	the display of the application.
id	the id of the application
data	the application's data

Returns: true if successful, false otherwise

Definition at line 510 of file kstartupinfo.cpp.

bool KStartupInfo::sendFinish ( const KStartupInfoId & id )

static

Ends startup notification with the given identification.

Parameters

id	the id of the application

Returns: true if successful, false otherwise

Definition at line 527 of file kstartupinfo.cpp.

bool KStartupInfo::sendFinish	(	const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

static

Ends startup notification with the given identification and the given data ( e.g.

PIDs of processes for this startup notification that exited ).

Parameters

id	the id of the application
data	the application's data

Returns: true if successful, false otherwise

Definition at line 555 of file kstartupinfo.cpp.

bool KStartupInfo::sendFinishX	(	Display *	dpy,
		const KStartupInfoId &	id
	)

static

Like sendFinish , uses dpy instead of qt_x11display() for sending the info.

Parameters

dpy	the display of the application.
id	the id of the application

Returns: true if successful, false otherwise

Definition at line 540 of file kstartupinfo.cpp.

bool KStartupInfo::sendFinishX	(	Display *	dpy,
		const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

static

Like sendFinish , uses dpy instead of qt_x11display() for sending the info.

Parameters

dpy	the display of the application.
id	the id of the application
data	the application's data

Returns: true if successful, false otherwise

Definition at line 569 of file kstartupinfo.cpp.

bool KStartupInfo::sendStartup	(	const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

static

Sends given notification data about started application with the given startup identification.

If no notification for this identification exists yet, it is created, otherwise it's updated. Note that the name field in data is required.

Parameters

id	the id of the application
data	the application's data

Returns: true if successful, false otherwise

See also: KStartupInfoId; KStartupInfoData

Definition at line 445 of file kstartupinfo.cpp.

bool KStartupInfo::sendStartupX	(	Display *	dpy,
		const KStartupInfoId &	id,
		const KStartupInfoData &	data
	)

static

Like sendStartup , uses dpy instead of qt_x11display() for sending the info.

Parameters

dpy	the display of the application. Note that the name field in data is required.
id	the id of the application
data	the application's data

Returns: true if successful, false otherwise

Definition at line 461 of file kstartupinfo.cpp.

void KStartupInfo::setNewStartupId	(	QWidget *	window,
		const QByteArray &	startup_id
	)

static

Use this function if the application got a request with startup notification from outside (for example, when KUniqueApplication::newInstance() is called, or e.g.

when khelpcenter opens new URL in its window). The window can be either an already existing and visible window, or a new one, before being shown. Note that this function is usually needed only when a window is reused.

Definition at line 643 of file kstartupinfo.cpp.

void KStartupInfo::setTimeout ( unsigned int secs )

Sets the timeout for notifications, after this timeout a notification is removed.

Parameters

secs	the new timeout in seconds

Definition at line 910 of file kstartupinfo.cpp.

void KStartupInfo::setWindowStartupId	(	WId	window,
		const QByteArray &	id
	)

static

Sets the startup notification window property on the given window.

Parameters

window	the id of the window
id	the startup notification id

Definition at line 874 of file kstartupinfo.cpp.

void KStartupInfo::silenceStartup ( bool silence )

static

If your application shows temporarily some window during its startup, for example a dialog, and only after closing it shows the main window, startup notification would normally be shown while the dialog is visible.

To temporarily suspend and resume the notification, use this function. Note that this is cumulative, i.e. after suspending twice, you have to resume twice.

Definition at line 626 of file kstartupinfo.cpp.

QByteArray KStartupInfo::windowStartupId ( WId w )

static

Returns startup notification identification of the given window.

Parameters

w	the id of the window

Returns: the startup notification id. Can be null if not found.

Definition at line 852 of file kstartupinfo.cpp.

The documentation for this class was generated from the following files:

KDEUI

Public Types

Signals

Public Member Functions

Static Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation

KDEUI

kdelibs API Reference

Search