KDialog Class Reference

from PyKDE4.kdeui import *

Inherits: QDialog → QWidget → QObject
Subclasses: Sonnet.ConfigDialog, Sonnet.Dialog, KAboutApplicationDialog, KBugReport, KColorDialog, KEditToolBar, KFindDialog, KFontDialog, KNewPasswordDialog, KPageDialog, KPasswordDialog, KPixmapRegionSelectorDialog, KProgressDialog, KShortcutsDialog, KTipDialog

Detailed Description

A dialog base class with standard buttons and predefined layouts.

Provides basic functionality needed by nearly all dialogs.

It offers the standard action buttons you'd expect to find in a dialog as well as the capability to define at most three configurable buttons. You can define a main widget that contains your specific dialog layout

The class takes care of the geometry management. You only need to define a minimum size for the widget you want to use as the main widget.

By default, the dialog is non-modal.

Standard buttons (action buttons):\n

You select which buttons should be displayed, but you do not choose the order in which they are displayed. This ensures a standard interface in KDE. The button order can be changed, but this ability is only available for a central KDE control tool. The following buttons are available: OK, Cancel/Close, Apply/Try, Default, Help and three user definable buttons: User1, User2 and User3. You must specify the text of the UserN buttons. Each button emit a signal, so you can choose to connect that signal.

The default action of the Help button will open the help system if you have provided a path to the help text. The default action of Ok and Cancel will run QDialog.accept() and QDialog.reject(), which you can override by reimplementing slotButtonClicked(). The default action of the Close button will close the dialog.

Note that the KDialog will animate a button press when the user presses Escape. The button that is enabled is either Cancel, Close or the button that is defined by setEscapeButton(). Your custom dialog code should reimplement the keyPressEvent and animate the cancel button so that the dialog behaves like regular dialogs.

Layout:\n

The dialog consists of a help area on top (becomes visible if you define a help path and use enableLinkedHelp()), the main area which is the built-in dialog face or your own widget in the middle and by default a button box at the bottom. The button box can also be placed at the right edge (to the right of the main widget). Use setButtonsOrientation() to control this behavior. A separator can be placed above the button box (or to the left when the button box is at the right edge).

Standard compliance:\n

The marginHint() and spacingHint() sizes shall be used whenever you lay out the interior of a dialog. One special note. If you make your own action buttons (OK, Cancel etc), the space between the buttons shall be spacingHint(), whereas the space above, below, to the right and to the left shall be marginHint(). If you add a separator line above the buttons, there shall be a marginHint() between the buttons and the separator and a marginHint() above the separator as well.

Example:\n

   KDialog *dialog = new KDialog( this );
   dialog->setCaption( "My title" );
   dialog->setButtons( KDialog.Ok | KDialog.Cancel | KDialog.Apply );

   FooWidget *widget = new FooWidget( dialog );
   dialog->setMainWidget( widget );
   connect( dialog, SIGNAL( applyClicked() ), widget, SLOT( save() ) );
   connect( dialog, SIGNAL( okClicked() ), widget, SLOT( save() ) );
   connect( widget, SIGNAL( changed( bool ) ), dialog, SLOT( enableButtonApply( bool ) ) );

   dialog->enableButtonApply( false );
   dialog->show();

This class can be used in many ways. Note that most KDE ui widgets and many of KDE core applications use the KDialog so for more inspiration you should study the code for these.

See also:: KPageDialog

Author:: Thomas Tanghus <tanghus@earthling.net>

Author:: Espen Sand <espensa@online.no>

Author:: Mirko Boehm <mirko@kde.org>

Author:: Olivier Goffart <ogoffart at kde.org>

Author:: Tobias Koenig <tokoe@kde.org>

Enumerations
ButtonCode	{ None, Help, Default, Ok, Apply, Try, Cancel, Close, No, Yes, Reset, Details, User1, User2, User3, NoDefault } Typesafe wrapper: ButtonCodes
ButtonPopupMode	{ InstantPopup, DelayedPopup } Typesafe wrapper: ButtonPopupModes
CaptionFlag	{ NoCaptionFlags, AppNameCaption, ModifiedCaption, HIGCompliantCaption } Typesafe wrapper: CaptionFlags
Signals
	aboutToShowDetails ()
	applyClicked ()
	buttonClicked (KDialog.ButtonCode button)
	cancelClicked ()
	closeClicked ()
	defaultClicked ()
	finished ()
	helpClicked ()
	hidden ()
	layoutHintChanged ()
	noClicked ()
	okClicked ()
	resetClicked ()
	tryClicked ()
	user1Clicked ()
	user2Clicked ()
	user3Clicked ()
	yesClicked ()
Methods
	__init__ (self, QWidget parent=0, Qt.WFlags flags=0)
	__init__ (self, KDialogPrivate dd, QWidget parent, Qt.WFlags flags=0)
	__init__ (self, KDialog a0)
	aboutToShowDetails (self)
	applyClicked (self)
KPushButton	button (self, KDialog.ButtonCode id)
	buttonClicked (self, KDialog.ButtonCode button)
KIcon	buttonIcon (self, KDialog.ButtonCode id)
QString	buttonText (self, KDialog.ButtonCode id)
QString	buttonToolTip (self, KDialog.ButtonCode id)
QString	buttonWhatsThis (self, KDialog.ButtonCode id)
	cancelClicked (self)
	closeClicked (self)
	closeEvent (self, QCloseEvent e)
KDialog.ButtonCode	defaultButton (self)
	defaultClicked (self)
	delayedDestruct (self)
	enableButton (self, KDialog.ButtonCode id, bool state)
	enableButtonApply (self, bool state)
	enableButtonCancel (self, bool state)
	enableButtonOk (self, bool state)
	enableLinkedHelp (self, bool state)
	finished (self)
	helpClicked (self)
QString	helpLinkText (self)
	hidden (self)
	hideEvent (self, QHideEvent a0)
	incrementInitialSize (self, QSize size)
bool	isButtonEnabled (self, KDialog.ButtonCode id)
bool	isDetailsWidgetVisible (self)
	keyPressEvent (self, QKeyEvent a0)
	layoutHintChanged (self)
QWidget	mainWidget (self)
QSize	minimumSizeHint (self)
	noClicked (self)
	okClicked (self)
	resetClicked (self)
	restoreDialogSize (self, KConfigGroup config)
	saveDialogSize (self, KConfigGroup config, KConfigBase.WriteConfigFlags options=KConfigGroup.Normal)
	setButtonFocus (self, KDialog.ButtonCode id)
	setButtonGuiItem (self, KDialog.ButtonCode id, KGuiItem item)
	setButtonIcon (self, KDialog.ButtonCode id, KIcon icon)
	setButtonMenu (self, KDialog.ButtonCode id, QMenu menu, KDialog.ButtonPopupMode popupmode=KDialog.InstantPopup)
	setButtonText (self, KDialog.ButtonCode id, QString text)
	setButtonToolTip (self, KDialog.ButtonCode id, QString text)
	setButtonWhatsThis (self, KDialog.ButtonCode id, QString text)
	setButtons (self, KDialog.ButtonCodes buttonMask)
	setButtonsOrientation (self, Qt.Orientation orientation)
	setCaption (self, QString caption)
	setCaption (self, QString caption, bool modified)
	setDefaultButton (self, KDialog.ButtonCode id)
	setDetailsWidget (self, QWidget detailsWidget)
	setDetailsWidgetVisible (self, bool visible)
	setEscapeButton (self, KDialog.ButtonCode id)
	setHelp (self, QString anchor, QString appname=QString())
	setHelpLinkText (self, QString text)
	setInitialSize (self, QSize size)
	setMainWidget (self, QWidget widget)
	setPlainCaption (self, QString caption)
	showButton (self, KDialog.ButtonCode id, bool state)
	showButtonSeparator (self, bool state)
QSize	sizeHint (self)
	slotButtonClicked (self, int button)
	tryClicked (self)
	updateGeometry (self)
	user1Clicked (self)
	user2Clicked (self)
	user3Clicked (self)
	yesClicked (self)
Static Methods
bool	avoidArea (QWidget widget, QRect area, int screen=-1)
	centerOnScreen (QWidget widget, int screen=-1)
QString	makeStandardCaption (QString userCaption, QWidget window=0, KDialog.CaptionFlags flags=KDialog.HIGCompliantCaption)
int	marginHint ()
	resizeLayout (QWidget widget, int margin, int spacing)
	resizeLayout (QLayout lay, int margin, int spacing)
int	spacingHint ()

Method Documentation

__init__	(	self,
		QWidget	parent=0,
		Qt.WFlags	flags=0
	)

Creates a dialog.

Parameters:

	parent	The parent of the dialog.
	flags	The widget flags passed to the QDialog constructor

__init__	(	self,
		KDialogPrivate	dd,
		QWidget	parent,
		Qt.WFlags	flags=0
	)

__init__	(	self,
		KDialog	a0
	)

aboutToShowDetails ( self )

The detailsWidget is about to get shown. This is your last chance to call setDetailsWidget if you haven't done so yet.

Signal syntax:: QObject.connect(source, SIGNAL("aboutToShowDetails()"), target_slot)

applyClicked ( self )

The Apply button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("applyClicked()"), target_slot)

bool avoidArea	(	QWidget	widget,
		QRect	area,
		int	screen=-1
	)

Places widget so that it doesn't cover a certain area of the screen. This is typically used by the "find dialog" so that the match it finds can be read. For screen, see centerOnScreen

Returns:: true on success (widget doesn't cover area anymore, or never did), false on failure (not enough space found)

KPushButton button	(	self,
		KDialog.ButtonCode	id
	)

Returns the button that corresponds to the id.

Normally you should not use this function. Never delete the object returned by this function. See also enableButton(), showButton(), setButtonGuiItem().

Parameters:

Identifier of the button.

Returns:: The button or 0 if the button does not exist.

buttonClicked	(	self,
		KDialog.ButtonCode	button
	)

A button has been pressed. This signal is only emitted if slotButtonClicked() is not replaced

Parameters:

button

is the code of the pressed button.

Signal syntax:: QObject.connect(source, SIGNAL("buttonClicked(ButtonCode)"), target_slot)

KIcon buttonIcon	(	self,
		KDialog.ButtonCode	id
	)

Returns the icon of any button.

QString buttonText	(	self,
		KDialog.ButtonCode	id
	)

Returns the text of any button.

QString buttonToolTip	(	self,
		KDialog.ButtonCode	id
	)

Returns the tooltip of any button.

QString buttonWhatsThis	(	self,
		KDialog.ButtonCode	id
	)

Returns the "What's this?" text of any button.

cancelClicked ( self )

The Cancel button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("cancelClicked()"), target_slot)

centerOnScreen	(	QWidget	widget,
		int	screen=-1
	)

Centers widget on the desktop, taking multi-head setups into account. If screen is -1, widget will be centered on its current screen (if it was shown already) or on the primary screen. If screen is -3, widget will be centered on the screen that currently contains the mouse pointer. screen will be ignored if a merged display (like Xinerama) is not in use, or merged display placement is not enabled in kdeglobals.

closeClicked ( self )

The Close button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("closeClicked()"), target_slot)

closeEvent	(	self,
		QCloseEvent	e
	)

Detects when a dialog is being closed from the window manager controls. If the Cancel or Close button is present then the button is activated. Otherwise standard QDialog behavior will take place.

KDialog.ButtonCode defaultButton ( self )

Returns the button code of the default button.

defaultClicked ( self )

The Default button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("defaultClicked()"), target_slot)

delayedDestruct ( self )

Destruct the dialog delayed.

You can call this function from slots like closeClicked() and hidden(). You should not use the dialog any more after calling this function.

enableButton	(	self,
		KDialog.ButtonCode	id,
		bool	state
	)

Enable or disable (gray out) a general action button.

Parameters:

	id	Button identifier.
	state	true enables the button(s).

enableButtonApply	(	self,
		bool	state
	)

Enable or disable (gray out) the Apply button.

Parameters:

state

true enables the button.

enableButtonCancel	(	self,
		bool	state
	)

Enable or disable (gray out) the Cancel button.

Parameters:

state

true enables the button.

enableButtonOk	(	self,
		bool	state
	)

Enable or disable (gray out) the OK button.

Parameters:

state

true enables the button.

enableLinkedHelp	(	self,
		bool	state
	)

Display or hide the help link area on the top of the dialog.

Parameters:

state

true will display the area.

See also:: helpLinkText()

See also:: setHelpLinkText()

See also:: setHelp()

finished ( self )

The dialog has finished.

A dialog emits finished after a user clicks a button that ends the dialog.

This signal is also emitted when you call hide()

If you have stored a pointer to the dialog do not try to delete the pointer in the slot that is connected to this signal.

You should use deleteLater() instead.

Signal syntax:: QObject.connect(source, SIGNAL("finished()"), target_slot)

helpClicked ( self )

The Help button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("helpClicked()"), target_slot)

QString helpLinkText ( self )

Returns the help link text.

If no text has been defined, "Get help..." (internationalized) is returned.

Returns:: The help link text.

See also:: enableLinkedHelp()

See also:: setHelpLinkText()

See also:: setHelp()

hidden ( self )

The dialog is about to be hidden.

A dialog is hidden after a user clicks a button that ends the dialog or when the user switches to another desktop or minimizes the dialog.

Signal syntax:: QObject.connect(source, SIGNAL("hidden()"), target_slot)

hideEvent	(	self,
		QHideEvent	a0
	)

Emits the #hidden signal. You can connect to that signal to detect when a dialog has been closed.

incrementInitialSize	(	self,
		QSize	size
	)

Convenience method. Add a size to the default minimum size of a dialog.

This method should only be called right before show() or exec().

Parameters:

size

Size added to minimum size.

bool isButtonEnabled	(	self,
		KDialog.ButtonCode	id
	)

Returns whether any button is enabled.

bool isDetailsWidgetVisible ( self )

Returns the status of the Details button.

keyPressEvent	(	self,
		QKeyEvent	a0
	)

Internal:

layoutHintChanged ( self )

Emitted when the margin size and/or spacing size have changed.

Use marginHint() and spacingHint() in your slot to get the new values.

Signal syntax:: QObject.connect(source, SIGNAL("layoutHintChanged()"), target_slot)

QWidget mainWidget ( self )

Returns:: The current main widget. Will create a QWidget as the mainWidget if none was set before. This way you can write

   ui.setupUi(mainWidget());

when using designer.

QString makeStandardCaption	(	QString	userCaption,
		QWidget	window=0,
		KDialog.CaptionFlags	flags=KDialog.HIGCompliantCaption
	)

Builds a caption that contains the application name along with the userCaption using a standard layout.

To make a compliant caption for your window, simply do: setWindowTitle(KDialog.makeStandardCaption(yourCaption));

To ensure that the caption is appropriate to the desktop in which the application is running, pass in a pointer to the window the caption will be applied to.

If using a KDialog or KMainWindow subclass, call setCaption instead and an appropraite standard caption will be created for you

Parameters:

	userCaption	The caption string you want to display in the window caption area. Do not include the application name!
	window	a pointer to the window this application will apply to
	flags

Returns:: the created caption

int marginHint ( )

Return the number of pixels you shall use between a dialog edge and the outermost widget(s) according to the KDE standard.

QSize minimumSizeHint ( self )

Reimplemented from QDialog.

noClicked ( self )

The No button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("noClicked()"), target_slot)

okClicked ( self )

The OK button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("okClicked()"), target_slot)

resetClicked ( self )

The Reset button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("resetClicked()"), target_slot)

resizeLayout	(	QWidget	widget,
		int	margin,
		int	spacing
	)

Resize every layout manager used in widget and its nested children.

Parameters:

	widget	The widget used.
	margin	The new layout margin.
	spacing	The new layout spacing.

resizeLayout	(	QLayout	lay,
		int	margin,
		int	spacing
	)

Resize every layout associated with lay and its children.

Parameters:

	lay	layout to be resized
	margin	The new layout margin
	spacing	The new layout spacing

restoreDialogSize	(	self,
		KConfigGroup	config
	)

Restores the dialog's size from the configuration according to the screen size.

Note:: the group must be set before calling

Parameters:

config

The config group to read from.

saveDialogSize	(	self,
		KConfigGroup	config,
		KConfigBase.WriteConfigFlags	options=KConfigGroup.Normal
	)

Saves the dialog's size dependent on the screen dimension either to the global or application config file.

Note:: the group must be set before calling

Parameters:

	config	The config group to read from.
	options	passed to KConfigGroup.writeEntry()

setButtonFocus	(	self,
		KDialog.ButtonCode	id
	)

Sets the focus to the button of the passed id.

setButtonGuiItem	(	self,
		KDialog.ButtonCode	id,
		KGuiItem	item
	)

Sets the KGuiItem directly for the button instead of using 3 methods to set the text, tooltip and whatsthis strings. This also allows to set an icon for the button which is otherwise not possible for the extra buttons beside Ok, Cancel and Apply.

Parameters:

	id	The button identifier.
	item	The KGuiItem for the button.

setButtonIcon	(	self,
		KDialog.ButtonCode	id,
		KIcon	icon
	)

Sets the icon of any button.

Parameters:

	id	The button identifier.
	icon	Button icon.

setButtonMenu	(	self,
		KDialog.ButtonCode	id,
		QMenu	menu,
		KDialog.ButtonPopupMode	popupmode=KDialog.InstantPopup
	)

Sets the menu of any button.

Parameters:

	id	The button identifier.
	menu	The menu.
	popupmode	Choose if KPushButton setMenu or setDelayedMenu is used

setButtonText	(	self,
		KDialog.ButtonCode	id,
		QString	text
	)

Sets the text of any button.

Parameters:

	id	The button identifier.
	text	Button text.

setButtonToolTip	(	self,
		KDialog.ButtonCode	id,
		QString	text
	)

Sets the tooltip text of any button.

Parameters:

	id	The button identifier.
	text	Button text.

setButtonWhatsThis	(	self,
		KDialog.ButtonCode	id,
		QString	text
	)

Sets the "What's this?" text of any button.

Parameters:

	id	The button identifier.
	text	Button text.

setButtons	(	self,
		KDialog.ButtonCodes	buttonMask
	)

Creates (or recreates) the button box and all the buttons in it.

This will reset all default KGuiItem of all button.

Parameters:

buttonMask

Specifies what buttons will be made.

setButtonsOrientation	(	self,
		Qt.Orientation	orientation
	)

Sets the orientation of the button box.

It can be Vertical or Horizontal. If Horizontal (default), the button box is positioned at the bottom of the dialog. If Vertical it will be placed at the right edge of the dialog.

Parameters:

orientation

The button box orientation.

setCaption	(	self,
		QString	caption
	)

Make a KDE compliant caption.

Parameters:

caption

Your caption. Do not include the application name in this string. It will be added automatically according to the KDE standard.

setCaption	(	self,
		QString	caption,
		bool	modified
	)

Makes a KDE compliant caption.

Parameters:

	caption	Your caption. Do not include the application name in this string. It will be added automatically according to the KDE standard.
	modified	Specify whether the document is modified. This displays an additional sign in the title bar, usually "**".

setDefaultButton	(	self,
		KDialog.ButtonCode	id
	)

Sets the button that will be activated when the Enter key is pressed.

By default, this is the Ok button if it is present

Parameters:

The button code.

setDetailsWidget	(	self,
		QWidget	detailsWidget
	)

Sets the widget that gets shown when "Details" is enabled.

The dialog takes over ownership of the widget. Any previously set widget gets deleted.

setDetailsWidgetVisible	(	self,
		bool	visible
	)

Sets the status of the Details button.

setEscapeButton	(	self,
		KDialog.ButtonCode	id
	)

Sets the button that will be activated when the Escape key is pressed.

By default, the Escape key is mapped to either the Cancel or the Close button if one of these buttons are defined. The user expects that Escape will cancel an operation so use this function with caution.

Parameters:

The button code.

setHelp	(	self,
		QString	anchor,
		QString	appname=QString()
	)

Sets the help path and topic.

Parameters:

	anchor	Defined anchor in your docbook sources
	appname	Defines the appname the help belongs to If empty it's the current one

Note:: The help button works differently for the class KCMultiDialog, so it does not make sense to call this function for Dialogs of that type. See KCMultiDialog.slotHelp() for more information.

setHelpLinkText	(	self,
		QString	text
	)

Sets the text that is shown as the linked text.

If text is empty, the text "Get help..." (internationalized) is used instead.

Parameters:

text

The link text.

See also:: helpLinkText()

See also:: enableLinkedHelp()

See also:: setHelp()

setInitialSize	(	self,
		QSize	size
	)

Convenience method. Sets the initial dialog size.

This method should only be called right before show() or exec(). The initial size will be ignored if smaller than the dialog's minimum size.

Parameters:

size

Startup size.

setMainWidget	(	self,
		QWidget	widget
	)

Sets the main widget of the dialog.

setPlainCaption	(	self,
		QString	caption
	)

Make a plain caption without any modifications.

Parameters:

caption

Your caption. This is the string that will be displayed in the window title.

showButton	(	self,
		KDialog.ButtonCode	id,
		bool	state
	)

Hide or display a general action button.

Only buttons that have been created in the constructor can be displayed. This method will not create a new button.

Parameters:

	id	Button identifier.
	state	true display the button(s).

showButtonSeparator	(	self,
		bool	state
	)

Hide or display the a separator line drawn between the action buttons an the main widget.

QSize sizeHint ( self )

Reimplemented from QDialog.

slotButtonClicked	(	self,
		int	button
	)

Activated when the button button is clicked

Sample that shows how to catch and handle button clicks within an own dialog;

 class MyDialog : public KDialog {
     protected slots:
         virtual void slotButtonClicked(int button) {
             if (button == KDialog.Ok)
                 accept();
             else
                 KDialog.slotButtonClicked(button);
         }
 }

Parameters:

button

is the type KDialog.ButtonCode

int spacingHint ( )

Return the number of pixels you shall use between widgets inside a dialog according to the KDE standard.

tryClicked ( self )

The Try button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("tryClicked()"), target_slot)

updateGeometry ( self )

Updates the margins and spacings.

user1Clicked ( self )

The User1 button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("user1Clicked()"), target_slot)

user2Clicked ( self )

The User2 button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("user2Clicked()"), target_slot)

user3Clicked ( self )

The User3 button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("user3Clicked()"), target_slot)

yesClicked ( self )

The Yes button was pressed. This signal is only emitted if slotButtonClicked() is not replaced

Signal syntax:: QObject.connect(source, SIGNAL("yesClicked()"), target_slot)

Enumeration Documentation

ButtonCode

Note:: It is necessary to wrap members of this enumeration in a ButtonCodes instance when passing them to a method as group of flags. For example: ButtonCodes( None | Help)

Enumerator:

None = 0x00000000
Help = 0x00000001
Default = 0x00000002
Ok = 0x00000004
Apply = 0x00000008
Try = 0x00000010
Cancel = 0x00000020
Close = 0x00000040
No = 0x00000080
Yes = 0x00000100
Reset = 0x00000200
Details = 0x00000400
User1 = 0x00001000
User2 = 0x00002000
User3 = 0x00004000
NoDefault = 0x00008000

ButtonPopupMode

Note:: It is necessary to wrap members of this enumeration in a ButtonPopupModes instance when passing them to a method as group of flags. For example: ButtonPopupModes( InstantPopup | DelayedPopup)

Enumerator:

InstantPopup = 0
DelayedPopup = 1

CaptionFlag

StandardCaptionFlag Used to specify how to construct a window caption

AppName - Indicates that the method shall include the application name when making the caption string. Modified - Causes a 'modified' sign will be included in the returned string. This is useful when indicating that a file is modified, i.e., it contains data that has not been saved. HIGCompliant - The base minimum flags required to align a caption with the KDE Human Interface Guidelines

Note:: It is necessary to wrap members of this enumeration in a CaptionFlags instance when passing them to a method as group of flags. For example: CaptionFlags( NoCaptionFlags | AppNameCaption)

Enumerator:

NoCaptionFlags = 0
AppNameCaption = 1
ModifiedCaption = 2
HIGCompliantCaption = AppNameCaption

KDialog Class Reference

Detailed Description

Enumerations

Signals

Methods

Static Methods

Method Documentation

Enumeration Documentation

Modules