KIO Namespace Reference

from PyKDE4.kio.KIO import *

Detailed Description

A namespace for KIO globals

Class Index

A	FileUndoManager (KIO)	RenameDialogPlugin (KIO)
AccessManager (KIO)	ForwardingSlaveBase (KIO)	S
AuthInfo (KIO)	J	Scheduler (KIO)
AutoLogin (KIO.NetRC)	Job (KIO)	SessionData (KIO)
C	JobUiDelegate (KIO)	SimpleJob (KIO)
ChmodJob (KIO)	L	SkipDialog (KIO)
Connection (KIO)	ListJob (KIO)	Slave (KIO)
ConnectionServer (KIO)	M	SlaveBase (KIO)
CookieJar (KIO.Integration)	MetaInfoJob (KIO)	SlaveConfig (KIO)
CopyInfo (KIO)	MimetypeJob (KIO)	SlaveInterface (KIO)
CopyJob (KIO)	MultiGetJob (KIO)	SpecialJob (KIO)
D	N	StatJob (KIO)
DavJob (KIO)	NetAccess (KIO)	StoredTransferJob (KIO)
DeleteJob (KIO)	NetRC (KIO)	T
DirectorySizeJob (KIO)	P	TCPSlaveBase (KIO)
F	PasswordDialog (KIO)	TransferJob (KIO)
FileCopyJob (KIO)	PreviewJob (KIO)	U
FileItem (KIO.RenameDialogPlugin)	R	UDSEntry (KIO)
FileJob (KIO)	RenameDialog (KIO)	UiInterface (KIO.FileUndoManager)

Enumerations
CacheControl	{ CC_CacheOnly, CC_Cache, CC_Verify, CC_Refresh, CC_Reload }
Command	{ CMD_HOST, CMD_CONNECT, CMD_DISCONNECT, CMD_SLAVE_STATUS, CMD_SLAVE_CONNECT, CMD_SLAVE_HOLD, CMD_NONE, CMD_TESTDIR, CMD_GET, CMD_PUT, CMD_STAT, CMD_MIMETYPE, CMD_LISTDIR, CMD_MKDIR, CMD_RENAME, CMD_COPY, CMD_DEL, CMD_CHMOD, CMD_SPECIAL, CMD_SETMODIFICATIONTIME, CMD_REPARSECONFIGURATION, CMD_META_DATA, CMD_SYMLINK, CMD_SUBURL, CMD_MESSAGEBOXANSWER, CMD_RESUMEANSWER, CMD_CONFIG, CMD_MULTI_GET, CMD_SETLINKDEST, CMD_OPEN, CMD_CHOWN, CMD_READ, CMD_WRITE, CMD_SEEK, CMD_CLOSE, CMD_HOST_INFO }
Error	{ ERR_CANNOT_OPEN_FOR_READING, ERR_CANNOT_OPEN_FOR_WRITING, ERR_CANNOT_LAUNCH_PROCESS, ERR_INTERNAL, ERR_MALFORMED_URL, ERR_UNSUPPORTED_PROTOCOL, ERR_NO_SOURCE_PROTOCOL, ERR_UNSUPPORTED_ACTION, ERR_IS_DIRECTORY, ERR_IS_FILE, ERR_DOES_NOT_EXIST, ERR_FILE_ALREADY_EXIST, ERR_DIR_ALREADY_EXIST, ERR_UNKNOWN_HOST, ERR_ACCESS_DENIED, ERR_WRITE_ACCESS_DENIED, ERR_CANNOT_ENTER_DIRECTORY, ERR_PROTOCOL_IS_NOT_A_FILESYSTEM, ERR_CYCLIC_LINK, ERR_USER_CANCELED, ERR_CYCLIC_COPY, ERR_COULD_NOT_CREATE_SOCKET, ERR_COULD_NOT_CONNECT, ERR_CONNECTION_BROKEN, ERR_NOT_FILTER_PROTOCOL, ERR_COULD_NOT_MOUNT, ERR_COULD_NOT_UNMOUNT, ERR_COULD_NOT_READ, ERR_COULD_NOT_WRITE, ERR_COULD_NOT_BIND, ERR_COULD_NOT_LISTEN, ERR_COULD_NOT_ACCEPT, ERR_COULD_NOT_LOGIN, ERR_COULD_NOT_STAT, ERR_COULD_NOT_CLOSEDIR, ERR_COULD_NOT_MKDIR, ERR_COULD_NOT_RMDIR, ERR_CANNOT_RESUME, ERR_CANNOT_RENAME, ERR_CANNOT_CHMOD, ERR_CANNOT_DELETE, ERR_SLAVE_DIED, ERR_OUT_OF_MEMORY, ERR_UNKNOWN_PROXY_HOST, ERR_COULD_NOT_AUTHENTICATE, ERR_ABORTED, ERR_INTERNAL_SERVER, ERR_SERVER_TIMEOUT, ERR_SERVICE_NOT_AVAILABLE, ERR_UNKNOWN, ERR_UNKNOWN_INTERRUPT, ERR_CANNOT_DELETE_ORIGINAL, ERR_CANNOT_DELETE_PARTIAL, ERR_CANNOT_RENAME_ORIGINAL, ERR_CANNOT_RENAME_PARTIAL, ERR_NEED_PASSWD, ERR_CANNOT_SYMLINK, ERR_NO_CONTENT, ERR_DISK_FULL, ERR_IDENTICAL_FILES, ERR_SLAVE_DEFINED, ERR_UPGRADE_REQUIRED, ERR_POST_DENIED, ERR_COULD_NOT_SEEK, ERR_CANNOT_SETTIME, ERR_CANNOT_CHOWN, ERR_POST_NO_SIZE }
Info	{ INF_TOTAL_SIZE, INF_PROCESSED_SIZE, INF_SPEED, INF_REDIRECTION, INF_MIME_TYPE, INF_ERROR_PAGE, INF_WARNING, INF_GETTING_FILE, INF_UNUSED, INF_INFOMESSAGE, INF_META_DATA, INF_NETWORK_STATUS, INF_MESSAGEBOX, INF_POSITION }
JobFlag	{ DefaultFlags, HideProgressInfo, Resume, Overwrite }
LoadType	{ Reload, NoReload }
Message	{ MSG_DATA, MSG_DATA_REQ, MSG_ERROR, MSG_CONNECTED, MSG_FINISHED, MSG_STAT_ENTRY, MSG_LIST_ENTRIES, MSG_RENAMED, MSG_RESUME, MSG_SLAVE_STATUS, MSG_SLAVE_ACK, MSG_NET_REQUEST, MSG_NET_DROP, MSG_NEED_SUBURL_DATA, MSG_CANRESUME, MSG_AUTH_KEY, MSG_DEL_AUTH_KEY, MSG_OPENED, MSG_WRITTEN, MSG_HOST_INFO_REQ }
RenameDialog_Mode	{ M_OVERWRITE, M_OVERWRITE_ITSELF, M_SKIP, M_SINGLE, M_MULTI, M_RESUME, M_NORENAME, M_ISDIR }
RenameDialog_Result	{ R_RESUME, R_RESUME_ALL, R_OVERWRITE, R_OVERWRITE_ALL, R_SKIP, R_AUTO_SKIP, R_RENAME, R_AUTO_RENAME, R_CANCEL }
SkipDialog_Result	{ S_SKIP, S_AUTO_SKIP, S_CANCEL }
Functions
QString	buildErrorString (int errorCode, QString errorText)
QString	buildHTMLErrorString (int errorCode, QString errorText, KUrl reqUrl=0, int method=-1)
QTime	calculateRemaining (long totalSize, long processedSize, long speed)
long	calculateRemainingSeconds (long totalSize, long processedSize, long speed)
bool	canPasteMimeSource (QMimeData data)
KIO.ChmodJob	chmod (KFileItemList lstItems, int permissions, int mask, QString newOwner, QString newGroup, bool recursive, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	chmod (KUrl url, int permissions)
KIO.SimpleJob	chown (KUrl url, QString owner, QString group)
QString	convertSeconds (long seconds)
QString	convertSize (long size)
QString	convertSizeFromKiB (long kibSize)
KIO.CopyJob	copy (KUrl src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	copy (KUrl.List src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	copyAs (KUrl src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.DavJob	davPropFind (KUrl url, QDomDocument properties, QString depth, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.DavJob	davPropPatch (KUrl url, QDomDocument properties, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.DavJob	davReport (KUrl url, QString report, QString depth, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.DavJob	davSearch (KUrl url, QString nsURI, QString qName, QString query, KIO.JobFlags flags=KIO.DefaultFlags)
QString	decodeFileName (QString str)
KIO.DeleteJob	del_ (KUrl src, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.DeleteJob	del_ (KUrl.List src, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.DirectorySizeJob	directorySize (KUrl directory)
KIO.DirectorySizeJob	directorySize (KFileItemList lstItems)
QString	encodeFileName (QString str)
KIO.MetaInfoJob	fileMetaInfo (KFileItemList items)
KIO.MetaInfoJob	fileMetaInfo (KUrl.List items)
KIO.PreviewJob	filePreview (KFileItemList items, int width, int height=0, int iconSize=0, int iconAlpha=70, bool scale=1, bool save=1, QStringList enabledPlugins=0)
KIO.PreviewJob	filePreview (KUrl.List items, int width, int height=0, int iconSize=0, int iconAlpha=70, bool scale=1, bool save=1, QStringList enabledPlugins=0)
KIO.PreviewJob	filePreview (KFileItemList items, QSize size, QStringList enabledPlugins=0)
KIO.FileCopyJob	file_copy (KUrl src, KUrl dest, int permissions=-1, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.FileCopyJob	file_copy (KUrl src, KUrl dest, KIO.JobFlags flags)
KIO.SimpleJob	file_delete (KUrl src, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.FileCopyJob	file_move (KUrl src, KUrl dest, int permissions=-1, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.FileCopyJob	file_move (KUrl src, KUrl dest, KIO.JobFlags flags)
KIO.TransferJob	get (KUrl url, KIO.LoadType reload=KIO.NoReload, KIO.JobFlags flags=KIO.DefaultFlags)
QString	getCacheControlString (KIO.CacheControl cacheControl)
KJobTrackerInterface	getJobTracker ()
KIO.TransferJob	http_post (KUrl url, QByteArray postData, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.TransferJob	http_post (KUrl url, QIODevice device, long size=-1, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	http_update_cache (KUrl url, bool no_cache, long expireDate)
QString	itemsSummaryString (long items, long files, long dirs, long size, bool showSize)
KIO.CopyJob	link (KUrl src, KUrl destDir, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	link (KUrl.List src, KUrl destDir, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	linkAs (KUrl src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.ListJob	listDir (KUrl url, KIO.JobFlags flags=KIO.DefaultFlags, bool includeHidden=1)
KIO.ListJob	listRecursive (KUrl url, KIO.JobFlags flags=KIO.DefaultFlags, bool includeHidden=1)
KIO.MimetypeJob	mimetype (KUrl url, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	mkdir (KUrl url, int permissions=-1)
KIO.StatJob	mostLocalUrl (KUrl url, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	mount (bool ro, QByteArray fstype, QString dev, QString point, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	move (KUrl src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	move (KUrl.List src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	moveAs (KUrl src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.MultiGetJob	multi_get (long id, KUrl url, KIO.MetaData metaData)
QString	number (long size)
KIO.FileJob	open (KUrl url, QIODevice::OpenMode mode)
QDataStream	operator << (QDataStream s, KIO.AuthInfo a)
QDBusArgument	operator << (QDBusArgument argument, KIO.AuthInfo a)
QDataStream	operator >> (QDataStream s, KIO.AuthInfo a)
QDBusArgument	operator >> (QDBusArgument argument, KIO.AuthInfo a)
KIO.CacheControl	parseCacheControl (QString cacheControl)
QString	pasteActionText ()
KIO.Job	pasteClipboard (KUrl destURL, QWidget widget, bool move=0)
	pasteData (KUrl destURL, QByteArray data, QWidget widget)
KIO.CopyJob	pasteDataAsync (KUrl destURL, QByteArray data, QWidget widget, QString dialogText=QString())
KIO.Job	pasteMimeData (QMimeData data, KUrl destUrl, QString dialogText, QWidget widget)
KIO.CopyJob	pasteMimeSource (QMimeData data, KUrl destURL, QString dialogText, QWidget widget, bool clipboard=0)
QPixmap	pixmapForUrl (KUrl _url, long _mode=0, KIconLoader.Group _group=KIconLoader.Desktop, int _force_size=0, int _state=0, QString _path=0)
KIO.TransferJob	put (KUrl url, int permissions, KIO.JobFlags flags=KIO.DefaultFlags)
QByteArray	rawErrorDetail (int errorCode, QString errorText, KUrl reqUrl=0, int method=-1)
KIO.SimpleJob	rename (KUrl src, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	rmdir (KUrl url)
KIO.SimpleJob	setModificationTime (KUrl url, QDateTime mtime)
KIO.SimpleJob	special (KUrl url, QByteArray data, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StatJob	stat (KUrl url, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StatJob	stat (KUrl url, KIO.StatJob.StatSide side, int details, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StatJob	stat (KUrl url, bool sideIsSource, int details, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StoredTransferJob	storedGet (KUrl url, KIO.LoadType reload=KIO.NoReload, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StoredTransferJob	storedHttpPost (QByteArray arr, KUrl url, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StoredTransferJob	storedHttpPost (QIODevice device, KUrl url, long size=-1, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.StoredTransferJob	storedPut (QByteArray arr, KUrl url, int permissions, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	symlink (QString target, KUrl dest, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	trash (KUrl src, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.CopyJob	trash (KUrl.List src, KIO.JobFlags flags=KIO.DefaultFlags)
KIO.SimpleJob	unmount (QString point, KIO.JobFlags flags=KIO.DefaultFlags)
QString	unsupportedActionErrorString (QString protocol, int cmd)

Enumeration Documentation

CacheControl

Specifies how to use the cache.

See also:: parseCacheControl()

See also:: getCacheControlString()

Enumerator:

CC_CacheOnly
CC_Cache
CC_Verify
CC_Refresh
CC_Reload

Command

Internal:: Commands that can be invoked by a job.

(Move this to a non-public header)

Enumerator:

CMD_HOST = '0'
CMD_CONNECT = '1'
CMD_DISCONNECT = '2'
CMD_SLAVE_STATUS = '3'
CMD_SLAVE_CONNECT = '4'
CMD_SLAVE_HOLD = '5'
CMD_NONE = 'A'
CMD_TESTDIR = 'B'
CMD_GET = 'C'
CMD_PUT = 'D'
CMD_STAT = 'E'
CMD_MIMETYPE = 'F'
CMD_LISTDIR = 'G'
CMD_MKDIR = 'H'
CMD_RENAME = 'I'
CMD_COPY = 'J'
CMD_DEL = 'K'
CMD_CHMOD = 'L'
CMD_SPECIAL = 'M'
CMD_SETMODIFICATIONTIME = 'N'
CMD_REPARSECONFIGURATION = 'O'
CMD_META_DATA = 'P'
CMD_SYMLINK = 'Q'
CMD_SUBURL = 'R'
CMD_MESSAGEBOXANSWER = 'S'
CMD_RESUMEANSWER = 'T'
CMD_CONFIG = 'U'
CMD_MULTI_GET = 'V'
CMD_SETLINKDEST = 'W'
CMD_OPEN = 'X'
CMD_CHOWN = 'Y'
CMD_READ = 'Z'
CMD_WRITE = 91
CMD_SEEK = 92
CMD_CLOSE = 93
CMD_HOST_INFO = 94

Error

Error codes that can be emitted by KIO.

Enumerator:

ERR_CANNOT_OPEN_FOR_READING = KJob::UserDefinedError+1
ERR_CANNOT_OPEN_FOR_WRITING = KJob::UserDefinedError+2
ERR_CANNOT_LAUNCH_PROCESS = KJob::UserDefinedError+3
ERR_INTERNAL = KJob::UserDefinedError+4
ERR_MALFORMED_URL = KJob::UserDefinedError+5
ERR_UNSUPPORTED_PROTOCOL = KJob::UserDefinedError+6
ERR_NO_SOURCE_PROTOCOL = KJob::UserDefinedError+7
ERR_UNSUPPORTED_ACTION = KJob::UserDefinedError+8
ERR_IS_DIRECTORY = KJob::UserDefinedError+9
ERR_IS_FILE = KJob::UserDefinedError+10
ERR_DOES_NOT_EXIST = KJob::UserDefinedError+11
ERR_FILE_ALREADY_EXIST = KJob::UserDefinedError+12
ERR_DIR_ALREADY_EXIST = KJob::UserDefinedError+13
ERR_UNKNOWN_HOST = KJob::UserDefinedError+14
ERR_ACCESS_DENIED = KJob::UserDefinedError+15
ERR_WRITE_ACCESS_DENIED = KJob::UserDefinedError+16
ERR_CANNOT_ENTER_DIRECTORY = KJob::UserDefinedError+17
ERR_PROTOCOL_IS_NOT_A_FILESYSTEM = KJob::UserDefinedError+18
ERR_CYCLIC_LINK = KJob::UserDefinedError+19
ERR_USER_CANCELED = KJob::KilledJobError
ERR_CYCLIC_COPY = KJob::UserDefinedError+21
ERR_COULD_NOT_CREATE_SOCKET = KJob::UserDefinedError+22
ERR_COULD_NOT_CONNECT = KJob::UserDefinedError+23
ERR_CONNECTION_BROKEN = KJob::UserDefinedError+24
ERR_NOT_FILTER_PROTOCOL = KJob::UserDefinedError+25
ERR_COULD_NOT_MOUNT = KJob::UserDefinedError+26
ERR_COULD_NOT_UNMOUNT = KJob::UserDefinedError+27
ERR_COULD_NOT_READ = KJob::UserDefinedError+28
ERR_COULD_NOT_WRITE = KJob::UserDefinedError+29
ERR_COULD_NOT_BIND = KJob::UserDefinedError+30
ERR_COULD_NOT_LISTEN = KJob::UserDefinedError+31
ERR_COULD_NOT_ACCEPT = KJob::UserDefinedError+32
ERR_COULD_NOT_LOGIN = KJob::UserDefinedError+33
ERR_COULD_NOT_STAT = KJob::UserDefinedError+34
ERR_COULD_NOT_CLOSEDIR = KJob::UserDefinedError+35
ERR_COULD_NOT_MKDIR = KJob::UserDefinedError+37
ERR_COULD_NOT_RMDIR = KJob::UserDefinedError+38
ERR_CANNOT_RESUME = KJob::UserDefinedError+39
ERR_CANNOT_RENAME = KJob::UserDefinedError+40
ERR_CANNOT_CHMOD = KJob::UserDefinedError+41
ERR_CANNOT_DELETE = KJob::UserDefinedError+42
ERR_SLAVE_DIED = KJob::UserDefinedError+43
ERR_OUT_OF_MEMORY = KJob::UserDefinedError+44
ERR_UNKNOWN_PROXY_HOST = KJob::UserDefinedError+45
ERR_COULD_NOT_AUTHENTICATE = KJob::UserDefinedError+46
ERR_ABORTED = KJob::UserDefinedError+47
ERR_INTERNAL_SERVER = KJob::UserDefinedError+48
ERR_SERVER_TIMEOUT = KJob::UserDefinedError+49
ERR_SERVICE_NOT_AVAILABLE = KJob::UserDefinedError+50
ERR_UNKNOWN = KJob::UserDefinedError+51
ERR_UNKNOWN_INTERRUPT = KJob::UserDefinedError+53
ERR_CANNOT_DELETE_ORIGINAL = KJob::UserDefinedError+54
ERR_CANNOT_DELETE_PARTIAL = KJob::UserDefinedError+55
ERR_CANNOT_RENAME_ORIGINAL = KJob::UserDefinedError+56
ERR_CANNOT_RENAME_PARTIAL = KJob::UserDefinedError+57
ERR_NEED_PASSWD = KJob::UserDefinedError+58
ERR_CANNOT_SYMLINK = KJob::UserDefinedError+59
ERR_NO_CONTENT = KJob::UserDefinedError+60
ERR_DISK_FULL = KJob::UserDefinedError+61
ERR_IDENTICAL_FILES = KJob::UserDefinedError+62
ERR_SLAVE_DEFINED = KJob::UserDefinedError+63
ERR_UPGRADE_REQUIRED = KJob::UserDefinedError+64
ERR_POST_DENIED = KJob::UserDefinedError+65
ERR_COULD_NOT_SEEK = KJob::UserDefinedError+66
ERR_CANNOT_SETTIME = KJob::UserDefinedError+67
ERR_CANNOT_CHOWN = KJob::UserDefinedError+68
ERR_POST_NO_SIZE = KJob::UserDefinedError+69

Info

Identifiers for KIO informational messages.

Enumerator:

INF_TOTAL_SIZE = 10
INF_PROCESSED_SIZE = 11
INF_SPEED
INF_REDIRECTION = 20
INF_MIME_TYPE = 21
INF_ERROR_PAGE = 22
INF_WARNING = 23
INF_GETTING_FILE
INF_UNUSED = 25
INF_INFOMESSAGE
INF_META_DATA
INF_NETWORK_STATUS
INF_MESSAGEBOX
INF_POSITION

JobFlag

Flags for the job properties. Not all flags are supported in all cases. Please see documentation of the calling function!

Enumerator:

DefaultFlags = 0
HideProgressInfo = 1
Resume = 2
Overwrite = 4

LoadType

Enumerator:

Reload
NoReload

Message

Identifiers for KIO data messages.

Enumerator:

MSG_DATA = 100
MSG_DATA_REQ
MSG_ERROR
MSG_CONNECTED
MSG_FINISHED
MSG_STAT_ENTRY
MSG_LIST_ENTRIES
MSG_RENAMED
MSG_RESUME
MSG_SLAVE_STATUS
MSG_SLAVE_ACK
MSG_NET_REQUEST
MSG_NET_DROP
MSG_NEED_SUBURL_DATA
MSG_CANRESUME
MSG_AUTH_KEY
MSG_DEL_AUTH_KEY
MSG_OPENED
MSG_WRITTEN
MSG_HOST_INFO_REQ

RenameDialog_Mode

M_OVERWRITE: We have an existing dest, show details about it and offer to overwrite it. M_OVERWRITE_ITSELF: Warn that the current operation would overwrite a file with itself, which is not allowed. M_SKIP: Offer a "Skip" button, to skip other files too. Requires M_MULTI. M_SINGLE: Deprecated and unused, please ignore. M_MULTI: Set if the current operation concerns multiple files, so it makes sense to offer buttons that apply the user's choice to all files/folders. M_RESUME: Offer a "Resume" button (plus "Resume All" if M_MULTI) M_NORENAME: Don't offer a "Rename" button M_ISDIR: The dest is a directory, so label the "overwrite" button something like "merge" instead.

Enumerator:

M_OVERWRITE = 1
M_OVERWRITE_ITSELF = 2
M_SKIP = 4
M_SINGLE = 8
M_MULTI = 16
M_RESUME = 32
M_NORENAME = 64
M_ISDIR = 128

RenameDialog_Result

The result of open_RenameDialog().

Enumerator:

R_RESUME = 6
R_RESUME_ALL = 7
R_OVERWRITE = 4
R_OVERWRITE_ALL = 5
R_SKIP = 2
R_AUTO_SKIP = 3
R_RENAME = 1
R_AUTO_RENAME = 8
R_CANCEL = 0

SkipDialog_Result

Enumerator:

S_SKIP = 1
S_AUTO_SKIP = 2
S_CANCEL = 0

Function Documentation

QString buildErrorString	(	int	errorCode,
		QString	errorText
	)

Returns a translated error message for errorCode using the additional error information provided by errorText.

Parameters:

	errorCode	the error code
	errorText	the additional error text

Returns:: the created error string

QString buildHTMLErrorString	(	int	errorCode,
		QString	errorText,
		KUrl	reqUrl=0,
		int	method=-1
	)

Returns a translated html error message for errorCode using the additional error information provided by errorText , reqUrl (the request URL), and the ioslave method .

Parameters:

	errorCode	the error code
	errorText	the additional error text
	reqUrl	the request URL
	method	the ioslave method

Returns:: the created error string

QTime calculateRemaining	(	long	totalSize,
		long	processedSize,
		long	speed
	)

Calculates remaining time from total size, processed size and speed. Warning: As QTime is limited to 23:59:59, use calculateRemainingSeconds() instead

Parameters:

		totalSize total size in bytes
		processedSize processed size in bytes
		speed speed in bytes per second

Returns:: calculated remaining time

long calculateRemainingSeconds	(	long	totalSize,
		long	processedSize,
		long	speed
	)

Calculates remaining time in seconds from total size, processed size and speed.

Parameters:

		totalSize total size in bytes
		processedSize processed size in bytes
		speed speed in bytes per second

Returns:: calculated remaining time in seconds

bool canPasteMimeSource	(	QMimeData	data
	)

Returns true if pasteMimeSource finds any interesting format in data. You can use this method to enable/disable the paste action appropriately.

Since:: 4.3

KIO.ChmodJob chmod	(	KFileItemList	lstItems,
		int	permissions,
		int	mask,
		QString	newOwner,
		QString	newGroup,
		bool	recursive,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Changes permissions on a file or directory. See the other chmod in chmodjob.h for changing many files or directories.

Parameters:

	url	The URL of file or directory.
	permissions	The permissions to set.

Returns:: the job handling the operation.

KIO.SimpleJob chmod	(	KUrl	url,
		int	permissions
	)

Changes permissions on a file or directory. See the other chmod in chmodjob.h for changing many files or directories.

Parameters:

	url	The URL of file or directory.
	permissions	The permissions to set.

Returns:: the job handling the operation.

KIO.SimpleJob chown	(	KUrl	url,
		QString	owner,
		QString	group
	)

Changes ownership and group of a file or directory.

Parameters:

	url	The URL of file or directory.
	owner	the new owner
	group	the new group

Returns:: the job handling the operation.

QString convertSeconds	(	long	seconds
	)

Convert seconds to a string representing number of days, hours, minutes and seconds

Parameters:

seconds number of seconds to convert

Returns:: string representation in a locale depending format

QString convertSize	(	long	size
	)

Converts size from bytes to the string representation.

Parameters:

size size in bytes

Returns:: converted size as a string - e.g. 123.4 KiB , 12.0 MiB

QString convertSizeFromKiB	(	long	kibSize
	)

Converts size from kibi-bytes (2^10) to the string representation.

Parameters:

kibSize size in kibi-bytes (2^10)

Returns:: converted size as a string - e.g. 123.4 KiB , 12.0 MiB

KIO.CopyJob copy	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Copy a list of file/dirs src into a destination directory dest.

Parameters:

	src	the list of files and/or directories
	dest	the destination
	flags:	copy() supports HideProgressInfo and Overwrite. Note: Overwrite has the meaning of both "write into existing directories" and "overwrite existing files". However if "dest" exists, then src is copied into a subdir of dest, just like "cp" does.

Returns:: the job handling the operation

KIO.CopyJob copy	(	KUrl.List	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Copy a list of file/dirs src into a destination directory dest.

Parameters:

	src	the list of files and/or directories
	dest	the destination
	flags:	copy() supports HideProgressInfo and Overwrite. Note: Overwrite has the meaning of both "write into existing directories" and "overwrite existing files". However if "dest" exists, then src is copied into a subdir of dest, just like "cp" does.

Returns:: the job handling the operation

KIO.CopyJob copyAs	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Copy a file or directory src into the destination dest, which is the destination name in any case, even for a directory.

As opposed to copy(), this doesn't emulate cp, but is the only way to copy a directory, giving it a new name and getting an error box if a directory already exists with the same name (or writing the contents of src into dest, when using Overwrite).

Parameters:

	src	the file or directory to copy
	dest	the destination
	flags:	copyAs() supports HideProgressInfo and Overwrite. Note: Overwrite has the meaning of both "write into existing directories" and "overwrite existing files".

Returns:: the job handling the operation

KIO.DavJob davPropFind	(	KUrl	url,
		QDomDocument	properties,
		QString	depth,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Creates a new DavJob that issues a PROPFIND command. PROPFIND retrieves the properties of the resource identified by the given url.

Parameters:

	url	the URL of the resource
	properties	a propfind document that describes the properties that should be retrieved
	depth	the depth of the request. Can be "0", "1" or "infinity"
	flags:	We support HideProgressInfo here

Returns:: the new DavJob

KIO.DavJob davPropPatch	(	KUrl	url,
		QDomDocument	properties,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Creates a new DavJob that issues a PROPPATCH command. PROPPATCH sets the properties of the resource identified by the given url.

Parameters:

	url	the URL of the resource
	properties	a PROPPACTCH document that describes the properties that should be modified and its new values
	flags:	We support HideProgressInfo here

Returns:: the new DavJob

KIO.DavJob davReport	(	KUrl	url,
		QString	report,
		QString	depth,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Creates a new DavJob that issues a REPORT command.

Parameters:

	url	the URL of the resource
	report	a REPORT document that describes the request to make
	depth	the depth of the request. Can be "0", "1" or "infinity"
	flags:	We support HideProgressInfo here

Returns:: the new DavJob

Since:: 4.4

KIO.DavJob davSearch	(	KUrl	url,
		QString	nsURI,
		QString	qName,
		QString	query,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Creates a new DavJob that issues a SEARCH command.

Parameters:

	url	the URL of the resource
	nsURI	the URI of the search method's qualified name
	qName	the local part of the search method's qualified name
	query	the search string
	flags:	We support HideProgressInfo here

Returns:: the new DavJob

QString decodeFileName	(	QString	str
	)

Decodes (from the filename to the text displayed) This doesn't do anything anymore, it used to do the opposite of encodeFileName when encodeFileName was using %2F for '/'.

Parameters:

str

the file name to decode

Returns:: the decoded file name

KIO.DeleteJob del_	(	KUrl	src,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Deletes a list of files or directories.

Parameters:

	src	the files to delete
	flags:	We support HideProgressInfo here

Returns:: the job handling the operation

KIO.DeleteJob del_	(	KUrl.List	src,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Deletes a list of files or directories.

Parameters:

	src	the files to delete
	flags:	We support HideProgressInfo here

Returns:: the job handling the operation

KIO.DirectorySizeJob directorySize	(	KUrl	directory
	)

Computes a directory size (by doing a recursive listing). Connect to the result signal (this is the preferred solution to avoid blocking the GUI), or use exec() for a synchronous (blocking) calculation.

This one lists the items from lstItems. The reason we asks for items instead of just urls, is so that we directly know if the item is a file or a directory, and in case of a file, we already have its size.

KIO.DirectorySizeJob directorySize	(	KFileItemList	lstItems
	)

QString encodeFileName	(	QString	str
	)

Encodes (from the text displayed to the real filename) This translates '/' into a "unicode fraction slash", QChar(0x2044). Used by KIO.link, for instance.

Parameters:

str

the file name to encode

Returns:: the encoded file name

KIO.MetaInfoJob fileMetaInfo	(	KFileItemList	items
	)

Retrieves meta information for the given items.

Parameters:

items

files to get metainfo for

Returns:: the MetaInfoJob to retrieve the items

Deprecated:: use strigi or KFileMetaInfo

KIO.MetaInfoJob fileMetaInfo	(	KUrl.List	items
	)

Retrieves meta information for the given items.

Parameters:

items

files to get metainfo for

Returns:: the MetaInfoJob to retrieve the items

Deprecated:: use strigi or KFileMetaInfo

KIO.PreviewJob filePreview	(	KFileItemList	items,
		int	width,
		int	height=0,
		int	iconSize=0,
		int	iconAlpha=70,
		bool	scale=1,
		bool	save=1,
		QStringList	enabledPlugins=0
	)

Creates a PreviewJob to generate a preview image for the given items.

Parameters:

	items	List of files to create previews for.
	size	Desired size of the preview.
	enabledPlugins	If non-zero it defines the list of plugins that are considered for generating the preview. If enabledPlugins is zero the plugins specified in the KConfigGroup "PreviewSettings" are used.

Since:: 4.7

KIO.PreviewJob filePreview	(	KUrl.List	items,
		int	width,
		int	height=0,
		int	iconSize=0,
		int	iconAlpha=70,
		bool	scale=1,
		bool	save=1,
		QStringList	enabledPlugins=0
	)

Creates a PreviewJob to generate a preview image for the given items.

Parameters:

	items	List of files to create previews for.
	size	Desired size of the preview.
	enabledPlugins	If non-zero it defines the list of plugins that are considered for generating the preview. If enabledPlugins is zero the plugins specified in the KConfigGroup "PreviewSettings" are used.

Since:: 4.7

KIO.PreviewJob filePreview	(	KFileItemList	items,
		QSize	size,
		QStringList	enabledPlugins=0
	)

Creates a PreviewJob to generate a preview image for the given items.

Parameters:

	items	List of files to create previews for.
	size	Desired size of the preview.
	enabledPlugins	If non-zero it defines the list of plugins that are considered for generating the preview. If enabledPlugins is zero the plugins specified in the KConfigGroup "PreviewSettings" are used.

Since:: 4.7

KIO.FileCopyJob file_copy	(	KUrl	src,
		KUrl	dest,
		int	permissions=-1,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Overload for catching code mistakes. Do NOT call this method (it is not implemented), insert a value for permissions (-1 by default) before the JobFlags.

Since:: 4.5

KIO.FileCopyJob file_copy	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags
	)

Overload for catching code mistakes. Do NOT call this method (it is not implemented), insert a value for permissions (-1 by default) before the JobFlags.

Since:: 4.5

KIO.SimpleJob file_delete	(	KUrl	src,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Delete a single file.

Parameters:

	src	File to delete.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.FileCopyJob file_move	(	KUrl	src,
		KUrl	dest,
		int	permissions=-1,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Overload for catching code mistakes. Do NOT call this method (it is not implemented), insert a value for permissions (-1 by default) before the JobFlags.

Since:: 4.3

KIO.FileCopyJob file_move	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags
	)

Overload for catching code mistakes. Do NOT call this method (it is not implemented), insert a value for permissions (-1 by default) before the JobFlags.

Since:: 4.3

KIO.TransferJob get	(	KUrl	url,
		KIO.LoadType	reload=KIO.NoReload,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Get (a.k.a. read). This is the job to use in order to "download" a file into memory. The slave emits the data through the data() signal.

Special case: if you want to determine the mimetype of the file first, and then read it with the appropriate component, you can still use a KIO.get() directly. When that job emits the mimeType signal, (which is guaranteed to happen before it emits any data), put the job on hold:

job->putOnHold();
KIO.Scheduler.publishSlaveOnHold();

and forget about the job. The next time someone does a KIO.get() on the same URL (even in another process) this job will be resumed. This saves KIO from doing two requests to the server.

Parameters:

	url	the URL of the file
	reload:	Reload to reload the file, NoReload if it can be taken from the cache
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

QString getCacheControlString	(	KIO.CacheControl	cacheControl
	)

Returns a string representation of the given cache control method.

Parameters:

cacheControl

the cache control method

Returns:: the string representation

See also:: parseCacheControl()

KJobTrackerInterface getJobTracker ( )

KIO.TransferJob http_post	(	KUrl	url,
		QByteArray	postData,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

HTTP POST.

This function, unlike the one that accepts a QByteArray, accepts an IO device from which to read the encoded data to be posted to the server in order to to avoid holding the content of very large post requests, e.g. multimedia file uploads, in memory.

Parameters:

	url	Where to write the data.
	postData	Encoded data to post.
	size	Size of the encoded post data.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

Since:: 4.7

KIO.TransferJob http_post	(	KUrl	url,
		QIODevice	device,
		long	size=-1,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

HTTP POST.

Parameters:

	url	Where to write the data.
	postData	Encoded data to post.
	size	Size of the encoded post data.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

Since:: 4.7

KIO.SimpleJob http_update_cache	(	KUrl	url,
		bool	no_cache,
		long	expireDate
	)

HTTP cache update

Parameters:

	url	Url to update, protocol must be "http".
	no_cache	If true, cache entry for url is deleted.
	expireDate	Local machine time indicating when the entry is supposed to expire.

Returns:: the job handling the operation.

QString itemsSummaryString	(	long	items,
		long	files,
		long	dirs,
		long	size,
		bool	showSize
	)

Helper for showing information about a set of files and directories

Parameters:

	items	the number of items (= files + dirs + number of symlinks :)
	files	the number of files
	dirs	the number of dirs
	size	the sum of the size of the files
	showSize	whether to show the size in the result

Returns:: the summary string

KIO.CopyJob link	(	KUrl	src,
		KUrl	destDir,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Create several links If the protocols and hosts are the same, a Unix symlink will be created. Otherwise, a .desktop file of Type Link and pointing to the src URL will be created.

Parameters:

	src	The existing files or directories, 'targets' of the link.
	destDir	Destination directory where the links will be created.
	flags:	link() supports HideProgressInfo only

Returns:: the job handling the operation

See also:: link()

KIO.CopyJob link	(	KUrl.List	src,
		KUrl	destDir,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Create several links If the protocols and hosts are the same, a Unix symlink will be created. Otherwise, a .desktop file of Type Link and pointing to the src URL will be created.

Parameters:

	src	The existing files or directories, 'targets' of the link.
	destDir	Destination directory where the links will be created.
	flags:	link() supports HideProgressInfo only

Returns:: the job handling the operation

See also:: link()

KIO.CopyJob linkAs	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Create a link. Unlike link() this operation will fail when the directory already exists. If the protocols and hosts are the same, a Unix symlink will be created. Otherwise, a .desktop file of Type Link and pointing to the src URL will be created.

Parameters:

	src	The existing file or directory, 'target' of the link.
	dest	Destination directory where the link will be created.
	flags:	linkAs() supports HideProgressInfo only

Returns:: the job handling the operation

See also:: link ()

See also:: copyAs()

KIO.ListJob listDir	(	KUrl	url,
		KIO.JobFlags	flags=KIO.DefaultFlags,
		bool	includeHidden=1
	)

List the contents of url, which is assumed to be a directory.

"." and ".." are returned, filter them out if you don't want them.

Parameters:

	url	the url of the directory
	flags	Can be HideProgressInfo here
	includeHidden	true for all files, false to cull out UNIX hidden files/dirs (whose names start with dot)

Returns:: the job handling the operation.

KIO.ListJob listRecursive	(	KUrl	url,
		KIO.JobFlags	flags=KIO.DefaultFlags,
		bool	includeHidden=1
	)

The same as the previous method, but recurses subdirectories. Directory links are not followed.

"." and ".." are returned but only for the toplevel directory. Filter them out if you don't want them.

Parameters:

	url	the url of the directory
	flags	Can be HideProgressInfo here
	includeHidden	true for all files, false to cull out UNIX hidden files/dirs (whose names start with dot)

Returns:: the job handling the operation.

KIO.MimetypeJob mimetype	(	KUrl	url,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Find mimetype for one file or directory.

If you are going to download the file right after determining its mimetype, then don't use this, prefer using a KIO.get() job instead. See the note about putting the job on hold once the mimetype is determined.

Parameters:

	url	the URL of the file
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.SimpleJob mkdir	(	KUrl	url,
		int	permissions=-1
	)

Creates a single directory.

Parameters:

	url	The URL of the directory to create.
	permissions	The permissions to set after creating the directory (unix-style), -1 for default permissions.

Returns:: A pointer to the job handling the operation.

KIO.StatJob mostLocalUrl	(	KUrl	url,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Tries to map a local URL for the given URL, using a KIO job.

Starts a (stat) job for determining the "most local URL" for a given URL. Retrieve the result with StatJob.mostLocalUrl in the result slot.

Parameters:

url

The URL we are testing.

Since:: 4.4

KIO.SimpleJob mount	(	bool	ro,
		QByteArray	fstype,
		QString	dev,
		QString	point,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Mount filesystem.

Special job for kio_file.

Parameters:

	ro	Mount read-only if true.
	fstype	File system type (e.g. "ext2", can be empty).
	dev	Device (e.g. /dev/sda0).
	point	Mount point, can be null.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.CopyJob move	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Moves a list of files or directories src to the given destination dest.

Parameters:

	src	the list of files or directories to copy
	dest	the destination
	flags:	move() supports HideProgressInfo and Overwrite. Note: Overwrite has the meaning of both "write into existing directories" and "overwrite existing files". However if "dest" exists, then src is copied into a subdir of dest, just like "cp" does.

Returns:: the job handling the operation

See also:: copy()

KIO.CopyJob move	(	KUrl.List	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Moves a list of files or directories src to the given destination dest.

Parameters:

	src	the list of files or directories to copy
	dest	the destination
	flags:	move() supports HideProgressInfo and Overwrite. Note: Overwrite has the meaning of both "write into existing directories" and "overwrite existing files". However if "dest" exists, then src is copied into a subdir of dest, just like "cp" does.

Returns:: the job handling the operation

See also:: copy()

KIO.CopyJob moveAs	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Moves a file or directory src to the given destination dest. Unlike move() this operation will not move src into dest when dest exists: it will either fail, or move the contents of src into it if Overwrite is set.

Parameters:

	src	the file or directory to copy
	dest	the destination
	flags:	moveAs() supports HideProgressInfo and Overwrite. Note: Overwrite has the meaning of both "write into existing directories" and "overwrite existing files".

Returns:: the job handling the operation

See also:: copyAs()

KIO.MultiGetJob multi_get	(	long	id,
		KUrl	url,
		KIO.MetaData	metaData
	)

Creates a new multiple get job.

Parameters:

	id	the id of the get operation
	url	the URL of the file
	metaData	the MetaData associated with the file

Returns:: the job handling the operation.

See also:: get()

QString number	(	long	size
	)

Converts a size to a string representation Not unlike QString.number(...)

Parameters:

size

size in bytes

Returns:: converted size as a string - e.g. 123456789

KIO.FileJob open	(	KUrl	url,
		QIODevice::OpenMode	mode
	)

Open ( random access I/O )

The file-job emits open() when opened

Parameters:

	url	the URL of the file
	mode	the access privileges: see OpenMode

Returns:: The file-handling job. It will never return 0. Errors are handled asynchronously (emitted as signals).

QDataStream operator <<	(	QDataStream	s,
		KIO.AuthInfo	a
	)

This class is intended to make it easier to prompt for, cache and retrieve authorization information.

When using this class to cache, retrieve or prompt authentication information, you only need to set the necessary attributes. For example, to check whether a password is already cached, the only required information is the URL of the resource and optionally whether or not a path match should be performed. Similarly, to prompt for password you only need to optionally set the prompt, username (if already supplied), comment and commentLabel fields.

<em>SPECIAL NOTE:</em> If you extend this class to add additional parameters do not forget to overload the stream insertion and extraction operators ("<<" and ">>") so that the added data can be correctly serialzed.

A two way messaging class for passing authentication information.

Author:: Dawit Alemayehu <adawit@kde.org>

QDBusArgument operator <<	(	QDBusArgument	argument,
		KIO.AuthInfo	a
	)

This class is intended to make it easier to prompt for, cache and retrieve authorization information.

A two way messaging class for passing authentication information.

Author:: Dawit Alemayehu <adawit@kde.org>

QDataStream operator >>	(	QDataStream	s,
		KIO.AuthInfo	a
	)

QDBusArgument operator >>	(	QDBusArgument	argument,
		KIO.AuthInfo	a
	)

KIO.CacheControl parseCacheControl	(	QString	cacheControl
	)

Parses the string representation of the cache control option.

Parameters:

cacheControl

the string representation

Returns:: the cache control value

See also:: getCacheControlString()

QString pasteActionText ( )

Returns the text to use for the Paste action, when the application supports pasting files, urls, and clipboard data, using pasteClipboard().

Returns:: a string suitable for KAction.setText, or an empty string if pasting isn't possible right now.

KIO.Job pasteClipboard	(	KUrl	destURL,
		QWidget	widget,
		bool	move=0
	)

Pastes the content of the clipboard to the given destination URL. URLs are treated separately (performing a file copy) from other data (which is saved into a file after asking the user to choose a filename and the preferred data format)

Parameters:

	destURL	the URL to receive the data
	widget	parent widget to use for dialogs
	move	true to move the data, false to copy -- now ignored and handled automatically

Returns:: the job that handles the operation

See also:: pasteData()

pasteData	(	KUrl	destURL,
		QByteArray	data,
		QWidget	widget
	)

Pastes the given data to the given destination URL. NOTE: This method is blocking (uses NetAccess for saving the data). Please consider using pasteDataAsync instead.

Parameters:

	destURL	the URL of the directory where the data will be pasted. The filename to use in that directory is prompted by this method.
	data	the data to copy
	widget	parent widget to use for dialogs

See also:: pasteClipboard()

This method is a candidate for disappearing in KDE5, email faure at kde.org if you are using it in your application, then I'll reconsider.

KIO.CopyJob pasteDataAsync	(	KUrl	destURL,
		QByteArray	data,
		QWidget	widget,
		QString	dialogText=QString()
	)

Pastes the given data to the given destination URL. Note that this method requires the caller to have chosen the QByteArray to paste before hand, unlike pasteClipboard and pasteMimeSource.

Parameters:

	destURL	the URL of the directory where the data will be pasted. The filename to use in that directory is prompted by this method.
	data	the data to copy
	dialogText	the text to show in the dialog

See also:: pasteClipboard()

This method is a candidate for disappearing in KDE5, email faure at kde.org if you are using it in your application, then I'll reconsider.

KIO.Job pasteMimeData	(	QMimeData	data,
		KUrl	destUrl,
		QString	dialogText,
		QWidget	widget
	)

Save the given mime data to the given destination URL after offering the user to choose a data format. This is the method used when handling drops (of anything else than URLs) onto dolphin and konqueror.

Parameters:

	data	the QMimeData, usually from a QDropEvent
	destUrl	the URL of the directory where the data will be pasted. The filename to use in that directory is prompted by this method.
	dialogText	the text to show in the dialog
	widget	parent widget to use for dialogs
	clipboard	whether the QMimeData comes from QClipboard. If you use pasteClipboard for that case, you never have to worry about this parameter.

See also:: pasteClipboard()

KIO.CopyJob pasteMimeSource	(	QMimeData	data,
		KUrl	destURL,
		QString	dialogText,
		QWidget	widget,
		bool	clipboard=0
	)

Deprecated:: because it returns a CopyJob*, and this is better implemented without a copy job. Use pasteMimeData instead. Note that you'll have to tell the user in case of an error (no data to paste), while pasteMimeSource did that.

QPixmap pixmapForUrl	(	KUrl	_url,
		long	_mode=0,
		KIconLoader.Group	_group=KIconLoader.Desktop,
		int	_force_size=0,
		int	_state=0,
		QString	_path=0
	)

Convenience method to find the pixmap for a URL.

Call this one when you don't know the mimetype.

Parameters:

	_url	URL for the file.
	_mode	the mode of the file. The mode may modify the icon with overlays that show special properties of the icon. Use 0 for default
	_group	The icon group where the icon is going to be used.
	_force_size	Override globally configured icon size. Use 0 for the default size
	_state	The icon state, one of: KIconLoader.DefaultState, KIconLoader.ActiveState or KIconLoader.DisabledState.
	_path	Output parameter to get the full path. Seldom needed. Ignored if 0

Returns:: the pixmap of the URL, can be a default icon if not found

KIO.TransferJob put	(	KUrl	url,
		int	permissions,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Put (a.k.a. write)

Parameters:

	url	Where to write data.
	permissions	May be -1. In this case no special permission mode is set.
	flags	Can be HideProgressInfo, Overwrite and Resume here. WARNING: Setting Resume means that the data will be appended to dest if dest exists.

Returns:: the job handling the operation.

See also:: multi_get()

QByteArray rawErrorDetail	(	int	errorCode,
		QString	errorText,
		KUrl	reqUrl=0,
		int	method=-1
	)

Returns translated error details for errorCode using the additional error information provided by errorText , reqUrl (the request URL), and the ioslave method .

Parameters:

	errorCode	the error code
	errorText	the additional error text
	reqUrl	the request URL
	method	the ioslave method

Returns:: the following data:

QString errorName - the name of the error

QString techName - if not null, the more technical name of the error

QString description - a description of the error

QStringList causes - a list of possible causes of the error

QStringList solutions - a liso of solutions for the error

KIO.SimpleJob rename	(	KUrl	src,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Rename a file or directory. Warning: this operation fails if a direct renaming is not possible (like with files or dirs on separate partitions) Use move or file_move in this case.

Parameters:

	src	The original URL
	dest	The final URL
	flags	Can be Overwrite here

Returns:: the job handling the operation.

KIO.SimpleJob rmdir	(	KUrl	url
	)

Removes a single directory.

The directory is assumed to be empty. The job will fail if the directory is not empty. Use KIO.del() (DeleteJob) to delete non-empty directories.

Parameters:

url

The URL of the directory to remove.

Returns:: A pointer to the job handling the operation.

KIO.SimpleJob setModificationTime	(	KUrl	url,
		QDateTime	mtime
	)

Changes the modification time on a file or directory.

Parameters:

	url	The URL of file or directory.
	permissions	The permissions to set.

Returns:: the job handling the operation.

KIO.SimpleJob special	(	KUrl	url,
		QByteArray	data,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Execute any command that is specific to one slave (protocol).

Examples are : HTTP POST, mount and unmount (kio_file)

Parameters:

	url	The URL isn't passed to the slave, but is used to know which slave to send it to :-)
	data	Packed data. The meaning is completely dependent on the slave, but usually starts with an int for the command number.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.StatJob stat	(	KUrl	url,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Find all details for one file or directory. This version of the call includes two additional booleans, sideIsSource and details.

Parameters:

	url	the URL of the file
	sideIsSource	is true when stating a source file (we will do a get on it if the stat works) and false when stating a destination file (target of a copy). The reason for this parameter is that in some cases the kioslave might not be able to determine a file's existence (e.g. HTTP doesn't allow it, FTP has issues with case-sensitivity on some systems). When the slave can't reliably determine the existence of a file, it will:

be optimistic if sideIsSource=true, i.e. it will assume the file exists,

and if it doesn't this will appear when actually trying to download it

be pessimistic if sideIsSource=false, i.e. it will assume the file

doesn't exist, to prevent showing "about to overwrite" errors to the user. If you simply want to check for existence without downloading/uploading afterwards, then you should use sideIsSource=false.

Parameters:

	details	selects the level of details we want. By default this is 2 (all details wanted, including modification time, size, etc.), setDetails(1) is used when deleting: we don't need all the information if it takes too much time, no need to follow symlinks etc. setDetails(0) is used for very simple probing: we'll only get the answer "it's a file or a directory, or it doesn't exist". This is used by KRun.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.StatJob stat	(	KUrl	url,
		KIO.StatJob.StatSide	side,
		int	details,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Find all details for one file or directory. This version of the call includes two additional booleans, sideIsSource and details.

Parameters:

	url	the URL of the file
	sideIsSource	is true when stating a source file (we will do a get on it if the stat works) and false when stating a destination file (target of a copy). The reason for this parameter is that in some cases the kioslave might not be able to determine a file's existence (e.g. HTTP doesn't allow it, FTP has issues with case-sensitivity on some systems). When the slave can't reliably determine the existence of a file, it will:

be optimistic if sideIsSource=true, i.e. it will assume the file exists,

and if it doesn't this will appear when actually trying to download it

be pessimistic if sideIsSource=false, i.e. it will assume the file

doesn't exist, to prevent showing "about to overwrite" errors to the user. If you simply want to check for existence without downloading/uploading afterwards, then you should use sideIsSource=false.

Parameters:

	details	selects the level of details we want. By default this is 2 (all details wanted, including modification time, size, etc.), setDetails(1) is used when deleting: we don't need all the information if it takes too much time, no need to follow symlinks etc. setDetails(0) is used for very simple probing: we'll only get the answer "it's a file or a directory, or it doesn't exist". This is used by KRun.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.StatJob stat	(	KUrl	url,
		bool	sideIsSource,
		int	details,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Find all details for one file or directory. This version of the call includes two additional booleans, sideIsSource and details.

Parameters:

	url	the URL of the file
	sideIsSource	is true when stating a source file (we will do a get on it if the stat works) and false when stating a destination file (target of a copy). The reason for this parameter is that in some cases the kioslave might not be able to determine a file's existence (e.g. HTTP doesn't allow it, FTP has issues with case-sensitivity on some systems). When the slave can't reliably determine the existence of a file, it will:

be optimistic if sideIsSource=true, i.e. it will assume the file exists,

and if it doesn't this will appear when actually trying to download it

be pessimistic if sideIsSource=false, i.e. it will assume the file

doesn't exist, to prevent showing "about to overwrite" errors to the user. If you simply want to check for existence without downloading/uploading afterwards, then you should use sideIsSource=false.

Parameters:

	details	selects the level of details we want. By default this is 2 (all details wanted, including modification time, size, etc.), setDetails(1) is used when deleting: we don't need all the information if it takes too much time, no need to follow symlinks etc. setDetails(0) is used for very simple probing: we'll only get the answer "it's a file or a directory, or it doesn't exist". This is used by KRun.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.StoredTransferJob storedGet	(	KUrl	url,
		KIO.LoadType	reload=KIO.NoReload,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Get (a.k.a. read), into a single QByteArray.

See also:: StoredTransferJob

Parameters:

	url	the URL of the file
	reload:	Reload to reload the file, NoReload if it can be taken from the cache
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

KIO.StoredTransferJob storedHttpPost	(	QByteArray	arr,
		KUrl	url,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

HTTP POST (a.k.a. write) data from the given IO device.

See also:: StoredTransferJob

Parameters:

	device	Device from which the encoded data to be posted is read.
	url	Where to write data.
	size	Size of the encoded data to be posted.
	flags	Can be HideProgressInfo here.

Returns:: the job handling the operation.

Since:: 4.7

KIO.StoredTransferJob storedHttpPost	(	QIODevice	device,
		KUrl	url,
		long	size=-1,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

HTTP POST (a.k.a. write) data from the given IO device.

See also:: StoredTransferJob

Parameters:

	device	Device from which the encoded data to be posted is read.
	url	Where to write data.
	size	Size of the encoded data to be posted.
	flags	Can be HideProgressInfo here.

Returns:: the job handling the operation.

Since:: 4.7

KIO.StoredTransferJob storedPut	(	QByteArray	arr,
		KUrl	url,
		int	permissions,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Put (a.k.a. write) data from a single QByteArray.

See also:: StoredTransferJob

Parameters:

	arr	The data to write
	url	Where to write data.
	permissions	May be -1. In this case no special permission mode is set.
	flags	Can be HideProgressInfo, Overwrite and Resume here. WARNING: Setting Resume means that the data will be appended to dest if dest exists.

Returns:: the job handling the operation.

KIO.SimpleJob symlink	(	QString	target,
		KUrl	dest,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Create or move a symlink. This is the lowlevel operation, similar to file_copy and file_move. It doesn't do any check (other than those the slave does) and it doesn't show rename and skip dialogs - use KIO.link for that.

Parameters:

	target	The string that will become the "target" of the link (can be relative)
	dest	The symlink to create.
	flags	Can be Overwrite and HideProgressInfo

Returns:: the job handling the operation.

KIO.CopyJob trash	(	KUrl	src,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Trash a list of files or directories. This is currently only supported for local files and directories.

Parameters:

	src	the files to delete
	flags:	trash() supports HideProgressInfo only

Returns:: the job handling the operation

KIO.CopyJob trash	(	KUrl.List	src,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Trash a list of files or directories. This is currently only supported for local files and directories.

Parameters:

	src	the files to delete
	flags:	trash() supports HideProgressInfo only

Returns:: the job handling the operation

KIO.SimpleJob unmount	(	QString	point,
		KIO.JobFlags	flags=KIO.DefaultFlags
	)

Unmount filesystem.

Special job for kio_file.

Parameters:

	point	Point to unmount.
	flags	Can be HideProgressInfo here

Returns:: the job handling the operation.

QString unsupportedActionErrorString	(	QString	protocol,
		int	cmd
	)

Returns an appropriate error message if the given command cmd is an unsupported action (ERR_UNSUPPORTED_ACTION).

Parameters:

	protocol	name of the protocol
	cmd	given command

See also:: enum Command

KIO Namespace Reference

Detailed Description

Class Index

Enumerations

Functions

Enumeration Documentation

Function Documentation

Modules