KNetwork::KClientSocketBase Class Reference

#include <k3clientsocketbase.h>

Inheritance diagram for KNetwork::KClientSocketBase:

Public Types
enum	SocketState {   Idle, HostLookup, HostFound, Bound,   Connecting, Open, Closing, Unconnected = Bound,   Connected = Open, Connection = Open }
Public Types inherited from KNetwork::KSocketBase
enum	SocketError {   NoError = 0, LookupFailure, AddressInUse, AlreadyCreated,   AlreadyBound, AlreadyConnected, NotConnected, NotBound,   NotCreated, WouldBlock, ConnectionRefused, ConnectionTimedOut,   InProgress, NetFailure, NotSupported, Timeout,   UnknownError, RemotelyDisconnected }
enum	SocketOptions {   Blocking = 0x01, AddressReuseable = 0x02, IPv6Only = 0x04, Keepalive = 0x08,   Broadcast = 0x10, NoDelay = 0x20 }

Signals
void	aboutToConnect (const KNetwork::KResolverEntry &remote, bool &skip)
void	bound (const KNetwork::KResolverEntry &local)
void	closed ()
void	connected (const KNetwork::KResolverEntry &remote)
void	gotError (int code)
void	hostFound ()
void	readyWrite ()
void	stateChanged (int newstate)

Public Member Functions
	KClientSocketBase (QObject *parent)
virtual	~KClientSocketBase ()
virtual bool	bind (const QString &node=QString(), const QString &service=QString())=0
virtual bool	bind (const KResolverEntry &address)
virtual qint64	bytesAvailable () const
virtual void	close ()
virtual bool	connect (const QString &node=QString(), const QString &service=QString(), OpenMode mode=ReadWrite)=0
virtual bool	connect (const KResolverEntry &address, OpenMode mode=ReadWrite)
virtual bool	disconnect ()
bool	emitsReadyRead () const
bool	emitsReadyWrite () const
virtual void	enableRead (bool enable)
virtual void	enableWrite (bool enable)
virtual bool	flush ()
virtual KSocketAddress	localAddress () const
KResolver &	localResolver () const
const KResolverResults &	localResults () const
virtual bool	lookup ()
virtual bool	open (OpenMode mode)
virtual KSocketAddress	peerAddress () const
KResolver &	peerResolver () const
const KResolverResults &	peerResults () const
void	setFamily (int families)
void	setResolutionEnabled (bool enable)
SocketState	state () const
virtual qint64	waitForMore (int msecs, bool *timeout=0L)
Public Member Functions inherited from KNetwork::KActiveSocketBase
	KActiveSocketBase (QObject *parent)
virtual	~KActiveSocketBase ()
virtual bool	atEnd () const
QString	errorString () const
virtual bool	isSequential () const
qint64	peek (char *data, qint64 maxlen)
qint64	peek (char *data, qint64 maxlen, KSocketAddress &from)
virtual qint64	pos () const
qint64	read (char *data, qint64 maxlen)
QByteArray	read (qint64 len)
qint64	read (char *data, qint64 maxlen, KSocketAddress &from)
virtual bool	seek (qint64)
virtual void	setSocketDevice (KSocketDevice *device)
virtual qint64	size () const
void	ungetChar (char)
qint64	write (const char *data, qint64 len)
qint64	write (const QByteArray &data)
qint64	write (const char *data, qint64 len, const KSocketAddress &to)
Public Member Functions inherited from QIODevice
	QIODevice ()
	QIODevice (QObject *parent)
virtual	~QIODevice ()
void	aboutToClose ()
Offset	at () const
bool	at (Offset offset)
virtual qint64	bytesToWrite () const
void	bytesWritten (qint64 bytes)
virtual bool	canReadLine () const
QString	errorString () const
int	flags () const
int	getch ()
bool	getChar (char *c)
bool	isAsynchronous () const
bool	isBuffered () const
bool	isCombinedAccess () const
bool	isDirectAccess () const
bool	isInactive () const
bool	isOpen () const
bool	isRaw () const
bool	isReadable () const
bool	isSequentialAccess () const
bool	isSynchronous () const
bool	isTextModeEnabled () const
bool	isTranslated () const
bool	isWritable () const
int	mode () const
virtual bool	open (QFlags< QIODevice::OpenModeFlag > mode)
OpenMode	openMode () const
qint64	peek (char *data, qint64 maxSize)
QByteArray	peek (qint64 maxSize)
int	putch (int ch)
bool	putChar (char c)
qint64	read (char *data, qint64 maxSize)
QByteArray	read (qint64 maxSize)
QByteArray	readAll ()
qint64	readBlock (char *data, quint64 size)
void	readChannelFinished ()
QByteArray	readLine (qint64 maxSize)
qint64	readLine (char *data, qint64 maxSize)
void	readyRead ()
virtual bool	reset ()
void	resetStatus ()
void	setTextModeEnabled (bool enabled)
int	state () const
Status	status () const
int	ungetch (int ch)
void	ungetChar (char c)
virtual bool	waitForBytesWritten (int msecs)
virtual bool	waitForReadyRead (int msecs)
qint64	write (const char *data)
qint64	write (const char *data, qint64 maxSize)
qint64	write (const QByteArray &byteArray)
qint64	writeBlock (const QByteArray &data)
qint64	writeBlock (const char *data, quint64 size)
Public Member Functions inherited from QObject
	QObject (QObject *parent)
	QObject (QObject *parent, const char *name)
virtual	~QObject ()
bool	blockSignals (bool block)
QObject *	child (const char *objName, const char *inheritsClass, bool recursiveSearch) const
const QObjectList &	children () const
const char *	className () const
bool	connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const
void	deleteLater ()
void	destroyed (QObject *obj)
bool	disconnect (const QObject *receiver, const char *method)
bool	disconnect (const char *signal, const QObject *receiver, const char *method)
void	dumpObjectInfo ()
void	dumpObjectTree ()
QList< QByteArray >	dynamicPropertyNames () const
virtual bool	event (QEvent *e)
virtual bool	eventFilter (QObject *watched, QEvent *event)
T	findChild (const QString &name) const
QList< T >	findChildren (const QRegExp &regExp) const
QList< T >	findChildren (const QString &name) const
bool	inherits (const char *className) const
void	insertChild (QObject *object)
void	installEventFilter (QObject *filterObj)
bool	isA (const char *className) const
bool	isWidgetType () const
void	killTimer (int id)
virtual const QMetaObject *	metaObject () const
void	moveToThread (QThread *targetThread)
const char *	name () const
const char *	name (const char *defaultName) const
QString	objectName () const
QObject *	parent () const
QVariant	property (const char *name) const
void	removeChild (QObject *object)
void	removeEventFilter (QObject *obj)
void	setName (const char *name)
void	setObjectName (const QString &name)
void	setParent (QObject *parent)
bool	setProperty (const char *name, const QVariant &value)
bool	signalsBlocked () const
int	startTimer (int interval)
QThread *	thread () const
Public Member Functions inherited from KNetwork::KSocketBase
	KSocketBase ()
virtual	~KSocketBase ()
bool	addressReuseable () const
bool	blocking () const
bool	broadcast () const
SocketError	error () const
QString	errorString () const
bool	isIPv6Only () const
QMutex *	mutex () const
bool	noDelay () const
virtual bool	setAddressReuseable (bool enable)
virtual bool	setBlocking (bool enable)
virtual bool	setBroadcast (bool enable)
virtual bool	setIPv6Only (bool enable)
virtual bool	setNoDelay (bool enable)
int	setRequestedCapabilities (int add, int remove=0)
KSocketDevice *	socketDevice () const

Protected Slots
virtual void	slotReadActivity ()
virtual void	slotWriteActivity ()

Protected Member Functions
void	copyError ()
virtual qint64	peekData (char *data, qint64 maxlen, KSocketAddress *from)
virtual qint64	readData (char *data, qint64 maxlen, KSocketAddress *from)
virtual bool	setSocketOptions (int opts)
void	setState (SocketState state)
virtual void	stateChanging (SocketState newState)
virtual qint64	writeData (const char *data, qint64 len, const KSocketAddress *to)
Protected Member Functions inherited from KNetwork::KActiveSocketBase
virtual qint64	readData (char *data, qint64 len)
void	resetError ()
void	setError (SocketError error)
virtual qint64	writeData (const char *data, qint64 len)
Protected Member Functions inherited from QIODevice
virtual qint64	readData (char *data, qint64 maxSize)=0
virtual qint64	readLineData (char *data, qint64 maxSize)
void	setErrorString (const QString &str)
void	setOpenMode (QFlags< QIODevice::OpenModeFlag > openMode)
virtual qint64	writeData (const char *data, qint64 maxSize)=0
Protected Member Functions inherited from QObject
bool	checkConnectArgs (const char *signal, const QObject *object, const char *method)
virtual void	childEvent (QChildEvent *event)
virtual void	connectNotify (const char *signal)
virtual void	customEvent (QEvent *event)
virtual void	disconnectNotify (const char *signal)
int	receivers (const char *signal) const
QObject *	sender () const
int	senderSignalIndex () const
virtual void	timerEvent (QTimerEvent *event)
Protected Member Functions inherited from KNetwork::KSocketBase
bool	hasDevice () const
void	resetError ()
void	setError (SocketError error)
virtual int	socketOptions () const

Additional Inherited Members
Static Public Member Functions inherited from QObject
bool	connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
bool	connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type)
bool	disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method)
bool	disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method)
QString	tr (const char *sourceText, const char *disambiguation, int n)
QString	trUtf8 (const char *sourceText, const char *disambiguation, int n)
Static Public Member Functions inherited from KNetwork::KSocketBase
static QString	errorString (SocketError code)
static bool	isFatalError (int code)
Public Attributes inherited from QIODevice
typedef	Offset
typedef	OpenMode
typedef	Status
Static Protected Member Functions inherited from QObject
QByteArray	normalizeSignalSlot (const char *signalSlot)
Properties inherited from QObject
	objectName

Detailed Description

Abstract client socket class.

This class provides the base functionality for client sockets, such as, and especially, name resolution and signals.

Note

This class is abstract. If you're looking for a normal, client socket class, see KStreamSocket and KBufferedSocket

Author

Thiago Macieira thiag.nosp@m.o@kd.nosp@m.e.org

Deprecated:

Use KSocketFactory or KLocalSocket instead

Definition at line 50 of file k3clientsocketbase.h.

Member Enumeration Documentation

enum KNetwork::KClientSocketBase::SocketState

Socket states.

These are the possible states for a KClientSocketBase:

• Idle: socket is not connected
• HostLookup: socket is doing host lookup prior to connecting
• HostFound: name lookup is complete
• Bound: the socket is locally bound
• Connecting: socket is attempting connection
• Open: socket is open
• Connected (=Open): socket is connected
• Connection (=Open): yet another name for a connected socket
• Closing: socket is shutting down

Whenever the socket state changes, the stateChanged(int) signal will be emitted.

Enumerator
Idle
HostLookup
HostFound
Bound
Connecting
Open
Closing
Unconnected
Connected
Connection

Definition at line 72 of file k3clientsocketbase.h.

Constructor & Destructor Documentation

KClientSocketBase::KClientSocketBase

(

QObject *

parent

)

Default constructor.

Parameters

parent

the parent QObject object

Definition at line 52 of file k3clientsocketbase.cpp.

KClientSocketBase::~KClientSocketBase ( )

virtual

Destructor.

Definition at line 60 of file k3clientsocketbase.cpp.

Member Function Documentation

void KNetwork::KClientSocketBase::aboutToConnect ( const KNetwork::KResolverEntry &  remote, bool &  skip  )

signal

This signal is emitted when the socket is about to connect to an address (but before doing so).

The skip parameter can be used to make the loop skip this address. Its value is initially false: change it to true if you want to skip the current address (as given by remote).

This function is also useful if one wants to reset the timeout.

Parameters

remote	the address we're about to connect to
skip	set to true if you want to skip this address

Note

if the connection is successful, the connected() signal will be emitted.

virtual bool KNetwork::KClientSocketBase::bind ( const QString &  node = QString(), const QString &  service = QString()  )

pure virtual

Binds this socket to the given nodename and service, or use the default ones if none are given.

Upon successful binding, the bound() signal will be emitted. If an error is found, the gotError() signal will be emitted.

Note

Due to the internals of the name lookup and binding mechanism, some (if not most) implementations of this function do not actually bind the socket until the connection is requested (see connect()). They only set the values for future reference.

This function returns true on success.

Parameters

node	the nodename
service	the service

Implemented in KNetwork::KDatagramSocket, and KNetwork::KStreamSocket.

bool KClientSocketBase::bind ( const KResolverEntry &  address )

virtual

Reimplemented from KSocketBase.

Connect this socket to this specific address.

Unlike bind(const QString&, const QString&) above, this function really does bind the socket. No lookup is performed. The bound() signal will be emitted.

Implements KNetwork::KActiveSocketBase.

Reimplemented in KNetwork::KDatagramSocket, and KNetwork::KStreamSocket.

Definition at line 193 of file k3clientsocketbase.cpp.

void KNetwork::KClientSocketBase::bound ( const KNetwork::KResolverEntry &  local )

signal

This signal is emitted when the socket successfully binds to an address.

Parameters

local

the local address we bound to

qint64 KClientSocketBase::bytesAvailable ( ) const

virtual

Returns the number of bytes available on this socket.

Reimplemented from KSocketBase.

Reimplemented from QIODevice.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 296 of file k3clientsocketbase.cpp.

void KClientSocketBase::close ( )

virtual

Closes the socket.

Reimplemented from QIODevice.

The closing of the socket causes the emission of the signal closed().

Reimplemented from QIODevice.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 270 of file k3clientsocketbase.cpp.

void KNetwork::KClientSocketBase::closed ( )

signal

This signal is emitted when the socket completes the closing/shut down process.

virtual bool KNetwork::KClientSocketBase::connect ( const QString &  node = QString(), const QString &  service = QString(), OpenMode  mode = ReadWrite  )

pure virtual

Attempts to connect to a given hostname and service, or use the default ones if none are given.

If a connection attempt is already in progress, check on its state and set the error status (NoError or InProgress).

If the blocking mode for this object is on, this function will only return when all the resolved peer addresses have been tried or when a connection is established.

Upon successfully connecting, the connected() signal will be emitted. If an error is found, the gotError() signal will be emitted.

Note for derived classes:

Derived classes must implement this function. The implementation will set the parameters for the lookup (using the peer KResolver object) and call lookup() to start it.

The implementation should use the hostFound() signal to be notified of the completion of the lookup process and then proceed to start the connection itself. Care should be taken regarding the value of blocking() flag.

Parameters

node	the nodename (host to connect to)
service	the service to connect to
mode	the mode to open the connection in

Implemented in KNetwork::KDatagramSocket, and KNetwork::KStreamSocket.

bool KClientSocketBase::connect ( const KResolverEntry &  address, OpenMode  mode = ReadWrite  )

virtual

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Reimplemented in KNetwork::KDatagramSocket, and KNetwork::KStreamSocket.

Definition at line 214 of file k3clientsocketbase.cpp.

void KNetwork::KClientSocketBase::connected ( const KNetwork::KResolverEntry &  remote )

signal

This socket is emitted when the socket successfully connects to a remote address.

Parameters

remote

the remote address we did connect to

void KClientSocketBase::copyError ( )

protected

Convenience function to set this object's error code to match that of the socket device.

Definition at line 453 of file k3clientsocketbase.cpp.

bool KClientSocketBase::disconnect ( )

virtual

Disconnects the socket.

Note that not all socket types can disconnect.

Implements KNetwork::KActiveSocketBase.

Definition at line 248 of file k3clientsocketbase.cpp.

bool KClientSocketBase::emitsReadyRead

(

)

const

Returns true if the readyRead signal is set to be emitted.

Definition at line 364 of file k3clientsocketbase.cpp.

bool KClientSocketBase::emitsReadyWrite

(

)

const

Returns true if the readyWrite signal is set to be emitted.

Definition at line 379 of file k3clientsocketbase.cpp.

void KClientSocketBase::enableRead ( bool  enable )

virtual

Enables the emission of the readyRead signal.

By default, this signal is enabled.

Parameters

enable

whether to enable the signal

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 369 of file k3clientsocketbase.cpp.

void KClientSocketBase::enableWrite ( bool  enable )

virtual

Enables the emission of the readyWrite signal.

By default, this signal is disabled.

Parameters

enable

whether to enable the signal

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 384 of file k3clientsocketbase.cpp.

bool KClientSocketBase::flush ( )

virtual

This call is not supported on unbuffered sockets.

Reimplemented from QIODevice.

Definition at line 290 of file k3clientsocketbase.cpp.

void KNetwork::KClientSocketBase::gotError ( int  code )

signal

This signal is emitted when this object finds an error.

The code parameter contains the error code that can also be found by calling error().

void KNetwork::KClientSocketBase::hostFound ( )

signal

This signal is emitted when the lookup is successfully completed.

KSocketAddress KClientSocketBase::localAddress ( ) const

virtual

Returns the local socket address.

Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Definition at line 354 of file k3clientsocketbase.cpp.

KResolver & KClientSocketBase::localResolver

(

)

const

Returns the internal KResolver object used for looking up the local host name and service.

This can be used to set extra options to the lookup process other than the default values, as well as obtaining the error codes in case of lookup failure.

Definition at line 103 of file k3clientsocketbase.cpp.

const KResolverResults & KClientSocketBase::localResults

(

)

const

Returns the internal list of resolved results for the local address.

Definition at line 108 of file k3clientsocketbase.cpp.

bool KClientSocketBase::lookup ( )

virtual

Starts the lookup for peer and local hostnames as well as their services.

If the blocking mode for this object is on, this function will wait for the lookup results to be available (by calling the KResolver::wait() method on the resolver objects).

When the lookup is done, the signal hostFound() will be emitted (only once, even if we're doing a double lookup). If the lookup failed (for any of the two lookups) the gotError() signal will be emitted with the appropriate error condition (see KSocketBase::SocketError).

This function returns true on success and false on error. Note that this is not the lookup result!

Definition at line 133 of file k3clientsocketbase.cpp.

bool KClientSocketBase::open ( OpenMode  mode )

virtual

Opens the socket.

Reimplemented from QIODevice.

You should not call this function; instead, use connect()

Reimplemented from KNetwork::KActiveSocketBase.

Definition at line 265 of file k3clientsocketbase.cpp.

qint64 KClientSocketBase::peekData ( char *  data, qint64  maxlen, KSocketAddress *  from  )

protectedvirtual

Peeks data from the socket.

Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 328 of file k3clientsocketbase.cpp.

KSocketAddress KClientSocketBase::peerAddress ( ) const

virtual

Returns the peer socket address.

Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Definition at line 359 of file k3clientsocketbase.cpp.

KResolver & KClientSocketBase::peerResolver

(

)

const

Returns the internal KResolver object used for looking up the peer host name and service.

This can be used to set extra options to the lookup process other than the default values, as well as obtaining the error codes in case of lookup failure.

Definition at line 93 of file k3clientsocketbase.cpp.

const KResolverResults & KClientSocketBase::peerResults

(

)

const

Returns the internal list of resolved results for the peer address.

Definition at line 98 of file k3clientsocketbase.cpp.

qint64 KClientSocketBase::readData ( char *  data, qint64  maxlen, KSocketAddress *  from  )

protectedvirtual

Reads data from a socket.

Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 316 of file k3clientsocketbase.cpp.

void KNetwork::KClientSocketBase::readyWrite ( )

signal

This signal is emitted whenever the socket is ready for writing – i.e., whenever there's space available in the buffers to receive more data.

The subsequent write operation is guaranteed to be non-blocking.

You can toggle the emission of this signal with the enableWrite() function. This signal is by default disabled. You will want to disable this signal after the first reception, since it'll probably fire at every event loop.

void KClientSocketBase::setFamily

(

int

families

)

Sets the allowed families for the resolutions.

Parameters

families

the families that we want/accept

See also

KResolver::SocketFamilies for possible values

Definition at line 127 of file k3clientsocketbase.cpp.

void KClientSocketBase::setResolutionEnabled

(

bool

enable

)

Enables or disables name resolution.

If this flag is set to true, bind() and connect() operations will trigger name lookup operations (i.e., converting a hostname into its binary form). If the flag is set to false, those operations will instead try to convert a string representation of an address without attempting name resolution.

This is useful, for instance, when IP addresses are in their string representation (such as "1.2.3.4") or come from other sources like KSocketAddress.

Parameters

enable

whether to enable

Definition at line 113 of file k3clientsocketbase.cpp.

bool KClientSocketBase::setSocketOptions ( int  opts )

protectedvirtual

Sets the socket options.

Reimplemented from KSocketBase.

Reimplemented from KNetwork::KSocketBase.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 77 of file k3clientsocketbase.cpp.

void KClientSocketBase::setState ( SocketState  state )

protected

Sets the socket state to state.

This function does not emit the stateChanged() signal.

Definition at line 71 of file k3clientsocketbase.cpp.

void KClientSocketBase::slotReadActivity ( )

protectedvirtualslot

This slot is connected to the read notifier's signal meaning the socket can read more data.

The default implementation only emits the readyRead signal.

Override if your class requires processing of incoming data.

Definition at line 394 of file k3clientsocketbase.cpp.

void KClientSocketBase::slotWriteActivity ( )

protectedvirtualslot

This slot is connected to the write notifier's signal meaning the socket can write more data.

The default implementation only emits the readyWrite signal.

Override if your class writes data from another source (like a buffer).

Definition at line 400 of file k3clientsocketbase.cpp.

KClientSocketBase::SocketState KClientSocketBase::state

(

)

const

Returns the current state for this socket.

See also

SocketState

Definition at line 66 of file k3clientsocketbase.cpp.

void KNetwork::KClientSocketBase::stateChanged ( int  newstate )

signal

This signal is emitted whenever the socket state changes.

Note: do not delete this object inside the slot called by this signal.

Parameters

newstate

the new state of the socket object

void KClientSocketBase::stateChanging ( SocketState  newState )

protectedvirtual

This function is called by setState() whenever the state changes.

You should override it if you need to specify any actions to be done when the state changes.

The default implementation acts for these states only:

• Connected: it sets up the socket notifiers to fire readyRead and readyWrite signals.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 429 of file k3clientsocketbase.cpp.

qint64 KClientSocketBase::waitForMore ( int  msecs, bool *  timeout = 0L  )

virtual

Waits for more data.

Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 304 of file k3clientsocketbase.cpp.

qint64 KClientSocketBase::writeData ( const char *  data, qint64  len, const KSocketAddress *  to  )

protectedvirtual

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Writes data to the socket.

Reimplemented from KSocketBase.

Implements KNetwork::KActiveSocketBase.

Reimplemented in KNetwork::KDatagramSocket, and KNetwork::KBufferedSocket.

Definition at line 340 of file k3clientsocketbase.cpp.

---

The documentation for this class was generated from the following files:

• k3clientsocketbase.h
• k3clientsocketbase.cpp