KNetwork::KActiveSocketBase Class Reference

#include <k3socketbase.h>

Inheritance diagram for KNetwork::KActiveSocketBase:

Public Member Functions
	KActiveSocketBase (QObject *parent)
virtual	~KActiveSocketBase ()
virtual bool	atEnd () const
virtual bool	bind (const KResolverEntry &address)=0
virtual bool	connect (const KResolverEntry &address, OpenMode mode=ReadWrite)=0
virtual bool	disconnect ()=0
QString	errorString () const
virtual bool	isSequential () const
virtual KSocketAddress	localAddress () const =0
virtual bool	open (OpenMode mode)
qint64	peek (char *data, qint64 maxlen)
qint64	peek (char *data, qint64 maxlen, KSocketAddress &from)
virtual KSocketAddress	peerAddress () const =0
virtual qint64	pos () const
qint64	read (char *data, qint64 maxlen)
QByteArray	read (qint64 len)
qint64	read (char *data, qint64 maxlen, KSocketAddress &from)
virtual bool	seek (qint64)
virtual void	setSocketDevice (KSocketDevice *device)
virtual qint64	size () const
void	ungetChar (char)
virtual qint64	waitForMore (int msecs, bool *timeout=0L)=0
qint64	write (const char *data, qint64 len)
qint64	write (const QByteArray &data)
qint64	write (const char *data, qint64 len, const KSocketAddress &to)
Public Member Functions inherited from QIODevice
	QIODevice ()
	QIODevice (QObject *parent)
virtual	~QIODevice ()
void	aboutToClose ()
Offset	at () const
bool	at (Offset offset)
virtual qint64	bytesAvailable () const
virtual qint64	bytesToWrite () const
void	bytesWritten (qint64 bytes)
virtual bool	canReadLine () const
virtual void	close ()
QString	errorString () const
int	flags () const
int	getch ()
bool	getChar (char *c)
bool	isAsynchronous () const
bool	isBuffered () const
bool	isCombinedAccess () const
bool	isDirectAccess () const
bool	isInactive () const
bool	isOpen () const
bool	isRaw () const
bool	isReadable () const
bool	isSequentialAccess () const
bool	isSynchronous () const
bool	isTextModeEnabled () const
bool	isTranslated () const
bool	isWritable () const
int	mode () const
virtual bool	open (QFlags< QIODevice::OpenModeFlag > mode)
OpenMode	openMode () const
qint64	peek (char *data, qint64 maxSize)
QByteArray	peek (qint64 maxSize)
int	putch (int ch)
bool	putChar (char c)
qint64	read (char *data, qint64 maxSize)
QByteArray	read (qint64 maxSize)
QByteArray	readAll ()
qint64	readBlock (char *data, quint64 size)
void	readChannelFinished ()
QByteArray	readLine (qint64 maxSize)
qint64	readLine (char *data, qint64 maxSize)
void	readyRead ()
virtual bool	reset ()
void	resetStatus ()
void	setTextModeEnabled (bool enabled)
int	state () const
Status	status () const
int	ungetch (int ch)
void	ungetChar (char c)
virtual bool	waitForBytesWritten (int msecs)
virtual bool	waitForReadyRead (int msecs)
qint64	write (const char *data)
qint64	write (const char *data, qint64 maxSize)
qint64	write (const QByteArray &byteArray)
qint64	writeBlock (const QByteArray &data)
qint64	writeBlock (const char *data, quint64 size)
Public Member Functions inherited from QObject
	QObject (QObject *parent)
	QObject (QObject *parent, const char *name)
virtual	~QObject ()
bool	blockSignals (bool block)
QObject *	child (const char *objName, const char *inheritsClass, bool recursiveSearch) const
const QObjectList &	children () const
const char *	className () const
bool	connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const
void	deleteLater ()
void	destroyed (QObject *obj)
bool	disconnect (const QObject *receiver, const char *method)
bool	disconnect (const char *signal, const QObject *receiver, const char *method)
void	dumpObjectInfo ()
void	dumpObjectTree ()
QList< QByteArray >	dynamicPropertyNames () const
virtual bool	event (QEvent *e)
virtual bool	eventFilter (QObject *watched, QEvent *event)
T	findChild (const QString &name) const
QList< T >	findChildren (const QRegExp &regExp) const
QList< T >	findChildren (const QString &name) const
bool	inherits (const char *className) const
void	insertChild (QObject *object)
void	installEventFilter (QObject *filterObj)
bool	isA (const char *className) const
bool	isWidgetType () const
void	killTimer (int id)
virtual const QMetaObject *	metaObject () const
void	moveToThread (QThread *targetThread)
const char *	name () const
const char *	name (const char *defaultName) const
QString	objectName () const
QObject *	parent () const
QVariant	property (const char *name) const
void	removeChild (QObject *object)
void	removeEventFilter (QObject *obj)
void	setName (const char *name)
void	setObjectName (const QString &name)
void	setParent (QObject *parent)
bool	setProperty (const char *name, const QVariant &value)
bool	signalsBlocked () const
int	startTimer (int interval)
QThread *	thread () const
Public Member Functions inherited from KNetwork::KSocketBase
	KSocketBase ()
virtual	~KSocketBase ()
bool	addressReuseable () const
bool	blocking () const
bool	broadcast () const
SocketError	error () const
QString	errorString () const
bool	isIPv6Only () const
QMutex *	mutex () const
bool	noDelay () const
virtual bool	setAddressReuseable (bool enable)
virtual bool	setBlocking (bool enable)
virtual bool	setBroadcast (bool enable)
virtual bool	setIPv6Only (bool enable)
virtual bool	setNoDelay (bool enable)
int	setRequestedCapabilities (int add, int remove=0)
KSocketDevice *	socketDevice () const

Protected Member Functions
virtual qint64	peekData (char *data, qint64 maxlen, KSocketAddress *from)=0
virtual qint64	readData (char *data, qint64 len)
virtual qint64	readData (char *data, qint64 maxlen, KSocketAddress *from)=0
void	resetError ()
void	setError (SocketError error)
virtual qint64	writeData (const char *data, qint64 len)
virtual qint64	writeData (const char *data, qint64 len, const KSocketAddress *to)=0
Protected Member Functions inherited from QIODevice
virtual qint64	readData (char *data, qint64 maxSize)=0
virtual qint64	readLineData (char *data, qint64 maxSize)
void	setErrorString (const QString &str)
void	setOpenMode (QFlags< QIODevice::OpenModeFlag > openMode)
virtual qint64	writeData (const char *data, qint64 maxSize)=0
Protected Member Functions inherited from QObject
bool	checkConnectArgs (const char *signal, const QObject *object, const char *method)
virtual void	childEvent (QChildEvent *event)
virtual void	connectNotify (const char *signal)
virtual void	customEvent (QEvent *event)
virtual void	disconnectNotify (const char *signal)
int	receivers (const char *signal) const
QObject *	sender () const
int	senderSignalIndex () const
virtual void	timerEvent (QTimerEvent *event)
Protected Member Functions inherited from KNetwork::KSocketBase
bool	hasDevice () const
void	resetError ()
void	setError (SocketError error)
virtual bool	setSocketOptions (int opts)
virtual int	socketOptions () const

Additional Inherited Members
Public Types inherited from KNetwork::KSocketBase
enum	SocketError {   NoError = 0, LookupFailure, AddressInUse, AlreadyCreated,   AlreadyBound, AlreadyConnected, NotConnected, NotBound,   NotCreated, WouldBlock, ConnectionRefused, ConnectionTimedOut,   InProgress, NetFailure, NotSupported, Timeout,   UnknownError, RemotelyDisconnected }
enum	SocketOptions {   Blocking = 0x01, AddressReuseable = 0x02, IPv6Only = 0x04, Keepalive = 0x08,   Broadcast = 0x10, NoDelay = 0x20 }
Static Public Member Functions inherited from QObject
bool	connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
bool	connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type)
bool	disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method)
bool	disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method)
QString	tr (const char *sourceText, const char *disambiguation, int n)
QString	trUtf8 (const char *sourceText, const char *disambiguation, int n)
Static Public Member Functions inherited from KNetwork::KSocketBase
static QString	errorString (SocketError code)
static bool	isFatalError (int code)
Public Attributes inherited from QIODevice
typedef	Offset
typedef	OpenMode
typedef	Status
Static Protected Member Functions inherited from QObject
QByteArray	normalizeSignalSlot (const char *signalSlot)
Properties inherited from QObject
	objectName

Detailed Description

Abstract class for active sockets.

This class provides the standard interfaces for active sockets, i.e., sockets that are used to connect to external addresses.

Author

Thiago Macieira thiag.nosp@m.o@kd.nosp@m.e.org

Deprecated:

Use KSocketFactory or KLocalSocket instead

Definition at line 461 of file k3socketbase.h.

Constructor & Destructor Documentation

KActiveSocketBase::KActiveSocketBase

(

QObject *

parent

)

Constructor.

Definition at line 325 of file k3socketbase.cpp.

KActiveSocketBase::~KActiveSocketBase ( )

virtual

Destructor.

Definition at line 330 of file k3socketbase.cpp.

Member Function Documentation

bool KActiveSocketBase::atEnd ( ) const

virtual

This call is not supported on sockets.

Reimplemented from QIODevice. This will always return true.

Reimplemented from QIODevice.

Definition at line 373 of file k3socketbase.cpp.

virtual bool KNetwork::KActiveSocketBase::bind ( const KResolverEntry &  address )

pure virtual

Binds this socket to the given address.

The socket will be constructed with the address family, socket type and protocol as those given in the address object.

Parameters

address

the address to bind to

Returns

true if the binding was successful, false otherwise

Implemented in KNetwork::KDatagramSocket, KNetwork::KClientSocketBase, KNetwork::KStreamSocket, KNetwork::KSocketDevice, and KNetwork::KSocksSocketDevice.

virtual bool KNetwork::KActiveSocketBase::connect ( const KResolverEntry &  address, OpenMode  mode = ReadWrite  )

pure virtual

Connect to a remote host.

This will make this socket try to connect to the remote host. If the socket is not yet created, it will be created using the address family, socket type and protocol specified in the address object.

If this function returns with error InProgress, calling it again with the same address after a time will cause it to test if the connection has succeeded in the mean time.

Parameters

address	the address to connect to
mode	mode for connection, from QIODevice

Returns

true if the connection was successful or has been successfully queued; false if an error occurred.

Implemented in KNetwork::KClientSocketBase, KNetwork::KDatagramSocket, KNetwork::KStreamSocket, and KNetwork::KSocketDevice.

virtual bool KNetwork::KActiveSocketBase::disconnect ( )

pure virtual

Disconnects this socket from a connection, if possible.

If this socket was connected to an endpoint, the connection is severed, but the socket is not closed. If the socket wasn't connected, this function does nothing.

If the socket hadn't yet been created, this function does nothing either.

Not all socket types can disconnect. Most notably, only connectionless datagram protocols such as UDP support this operation.

Returns

true if the socket is now disconnected or false on error.

Implemented in KNetwork::KClientSocketBase, and KNetwork::KSocketDevice.

QString KActiveSocketBase::errorString

(

)

const

Unshadow errorString from QIODevice.

Definition at line 334 of file k3socketbase.cpp.

bool KActiveSocketBase::isSequential ( ) const

virtual

Sockets are sequential.

Reimplemented from QIODevice.

Definition at line 353 of file k3socketbase.cpp.

virtual KSocketAddress KNetwork::KActiveSocketBase::localAddress ( ) const

pure virtual

Returns this socket's local address.

Implemented in KNetwork::KClientSocketBase, KNetwork::KSocketDevice, and KNetwork::KSocksSocketDevice.

bool KActiveSocketBase::open ( OpenMode  mode )

virtual

Reimplemented from QIODevice.

Reimplemented in KNetwork::KClientSocketBase.

Definition at line 339 of file k3socketbase.cpp.

qint64 KActiveSocketBase::peek	(	char *	data,
		qint64	maxlen
	)

Peeks the data in the socket and the source address.

This call will allow you to peek the data to be received without actually receiving it – that is, it will be available for further peekings and for the next read call.

Parameters

data	where to write the peeked data to
maxlen	the maximum number of bytes to peek

Returns

the actual number of bytes copied into data

Definition at line 394 of file k3socketbase.cpp.

qint64 KActiveSocketBase::peek	(	char *	data,
		qint64	maxlen,
		KSocketAddress &	from
	)

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Peeks the data in the socket and the source address.

This call will allow you to peek the data to be received without actually receiving it – that is, it will be available for further peekings and for the next read call.

Parameters

data	where to write the peeked data to
maxlen	the maximum number of bytes to peek
from	the address of the sender will be stored here

Returns

the actual number of bytes copied into data

Definition at line 399 of file k3socketbase.cpp.

virtual qint64 KNetwork::KActiveSocketBase::peekData ( char *  data, qint64  maxlen, KSocketAddress *  from  )

protectedpure virtual

Peeks the data in the socket and the source address.

This call will allow you to peek the data to be received without actually receiving it – that is, it will be available for further peekings and for the next read call.

Parameters

data	where to write the peeked data to
maxlen	the maximum number of bytes to peek
from	the address of the sender will be stored here

Returns

the actual number of bytes copied into data

Implemented in KNetwork::KClientSocketBase, KNetwork::KSocketDevice, and KNetwork::KBufferedSocket.

virtual KSocketAddress KNetwork::KActiveSocketBase::peerAddress ( ) const

pure virtual

Return this socket's peer address, if we are connected.

If the address cannot be retrieved, the returned object will contain an invalid address.

Implemented in KNetwork::KClientSocketBase, KNetwork::KSocketDevice, KNetwork::KSocksSocketDevice, and KNetwork::KHttpProxySocketDevice.

qint64 KActiveSocketBase::pos ( ) const

virtual

This call is not supported on sockets.

Reimplemented from QIODevice. This will always return 0.

Reimplemented from QIODevice.

Definition at line 363 of file k3socketbase.cpp.

qint64 KActiveSocketBase::read	(	char *	data,
		qint64	maxlen
	)

Reads data from the socket.

Reimplemented from QIODevice. See QIODevice::read for more information.

Definition at line 378 of file k3socketbase.cpp.

QByteArray KActiveSocketBase::read

(

qint64

len

)

Reads data from the socket.

Reimplemented from QIODevice. See QIODevice::read for more information.

Definition at line 383 of file k3socketbase.cpp.

qint64 KActiveSocketBase::read	(	char *	data,
		qint64	maxlen,
		KSocketAddress &	from
	)

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Receives data and the source address.

This call will read data in the socket and will also place the sender's address in from object.

Parameters

data	where to write the read data to
maxlen	the maximum number of bytes to read
from	the address of the sender will be stored here

Returns

the actual number of bytes read

Definition at line 388 of file k3socketbase.cpp.

qint64 KActiveSocketBase::readData ( char *  data, qint64  len  )

protectedvirtual

Reads data from the socket.

Reimplemented from QIODevice. See QIODevice::readData for more information.

Definition at line 425 of file k3socketbase.cpp.

virtual qint64 KNetwork::KActiveSocketBase::readData ( char *  data, qint64  maxlen, KSocketAddress *  from  )

protectedpure virtual

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Receives data and the source address.

This call will read data in the socket and will also place the sender's address in from object.

Parameters

data	where to write the read data to
maxlen	the maximum number of bytes to read
from	the address of the sender will be stored here

Returns

the actual number of bytes read

Implemented in KNetwork::KClientSocketBase, KNetwork::KSocketDevice, and KNetwork::KBufferedSocket.

void KActiveSocketBase::resetError ( )

protected

Resets the socket error code and the I/O Device's status.

Definition at line 441 of file k3socketbase.cpp.

bool KActiveSocketBase::seek ( qint64  )

virtual

This call is not supported on sockets.

Reimplemented from QIODevice. This will always return false.

Reimplemented from QIODevice.

Definition at line 368 of file k3socketbase.cpp.

void KActiveSocketBase::setError ( SocketError  error )

protected

Sets the socket's error code.

Parameters

error

the error code

Definition at line 435 of file k3socketbase.cpp.

void KActiveSocketBase::setSocketDevice ( KSocketDevice *  device )

virtual

Reimplemented from superclass.

Reimplemented from KNetwork::KSocketBase.

Reimplemented in KNetwork::KBufferedSocket.

Definition at line 347 of file k3socketbase.cpp.

qint64 KActiveSocketBase::size ( ) const

virtual

This call is not supported on sockets.

Reimplemented from QIODevice. This will always return 0.

Reimplemented from QIODevice.

Definition at line 358 of file k3socketbase.cpp.

void KActiveSocketBase::ungetChar

(

char

)

This call is not supported on sockets.

Reimplemented from QIODevice.

Definition at line 420 of file k3socketbase.cpp.

virtual qint64 KNetwork::KActiveSocketBase::waitForMore ( int  msecs, bool *  timeout = 0L  )

pure virtual

Waits up to msecs for more data to be available on this socket.

If msecs is -1, this call will block indefinetely until more data is indeed available; if it's 0, this function returns immediately.

If timeout is not NULL, this function will set it to indicate if a timeout occurred.

Returns

the number of bytes available

Implemented in KNetwork::KClientSocketBase, KNetwork::KSocketDevice, and KNetwork::KBufferedSocket.

qint64 KActiveSocketBase::write	(	const char *	data,
		qint64	len
	)

Writes the given data to the socket.

Reimplemented from QIODevice. See QIODevice::write for more information.

Definition at line 404 of file k3socketbase.cpp.

qint64 KActiveSocketBase::write

(

const QByteArray &

data

)

Writes the given data to the socket.

Reimplemented from QIODevice. See QIODevice::write for more information.

Definition at line 409 of file k3socketbase.cpp.

qint64 KActiveSocketBase::write	(	const char *	data,
		qint64	len,
		const KSocketAddress &	to
	)

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Writes the given data to the destination address.

Note that not all socket connections allow sending data to different addresses than the one the socket is connected to.

Parameters

data	the data to write
len	the length of the data
to	the address to send to

Returns

the number of bytes actually sent

Definition at line 414 of file k3socketbase.cpp.

qint64 KActiveSocketBase::writeData ( const char *  data, qint64  len  )

protectedvirtual

Writes the given data to the socket.

Reimplemented from QIODevice. See QIODevice::writeData for more information.

Definition at line 430 of file k3socketbase.cpp.

virtual qint64 KNetwork::KActiveSocketBase::writeData ( const char *  data, qint64  len, const KSocketAddress *  to  )

protectedpure virtual

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Writes the given data to the destination address.

Note that not all socket connections allow sending data to different addresses than the one the socket is connected to.

Parameters

data	the data to write
len	the length of the data
to	the address to send to

Returns

the number of bytes actually sent

Implemented in KNetwork::KClientSocketBase, KNetwork::KSocketDevice, KNetwork::KDatagramSocket, and KNetwork::KBufferedSocket.

---

The documentation for this class was generated from the following files:

• k3socketbase.h
• k3socketbase.cpp